|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-21-2015, 12:58 PM
|
#1 |
|
Registered User
Join Date: Feb 2013
Location: Tyler Texas
Posts: 288
|
Change the pick up tube O-ring?
I have a 6.0 with less than 100K miles on it and I was wondering if now would be a good time to drop the pan and change the pick up tube O-ring. I will be cleaning and painting it soon and if I were going to do it, now would be the time. This is my first LS and I know that the O-rings have problems, I just wanted someone with more LS knowledge to chime in. Or maybe there is something else I needed to look at before I painted the motor.
__________________
My 1972 K5 6.0 LTR 4L60 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=622068 |
|
|
|
12-21-2015, 07:50 PM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: Change the pick up tube O-ring?
I would only change the o ring if you were swapping oil pans and pick up tube. If you don't need to change the pan, then leave it alone.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
12-21-2015, 09:14 PM
|
#3 | |
|
Registered User
Join Date: Feb 2013
Location: Tyler Texas
Posts: 288
|
Re: Change the pick up tube O-ring?
Quote:
Now I gotta figure out the best way to clean and paint this thing. I've never had great results from a rattle can LOL
__________________
My 1972 K5 6.0 LTR 4L60 Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=622068 |
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
