Flowmasters getting on my nerves... - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LockDoc** · 01-03-2016, 09:01 PM

-
I had 40 knockoffs put on the '67 Panel Truck with the LS1/4l60e. The pipes are all the way back and angled out the sides. My hearing is pretty bad and the drone still drives me nuts. I am planning on driving it on some long trips so I am going to have them replaced next Spring, but I don't know what to put on it. I have been thinking about stock type mufflers with electric cutouts. I have 3 or 4 months to think about it....

LockDoc

piecesparts · 01-03-2016, 09:38 PM

I gave up running Flowmasters for a couple reasons. The first one being that I had to replace the muffler way to many times, due to the sidewalls cracking and breaking open and second, due to the sound being too much of a drone to be comfortable. I now run Magnaflow stainless steel mufflers and I get the longevity that I want and the sound is right about where I want it for daily driving. Loud when you are hard on the pedal and a rumble when you are not.

drewbert41 · 01-04-2016, 12:59 AM

What model Magnaflows are you guys running?

iostorm · 01-04-2016, 08:25 AM

I had the American Thunder system on my Challenger, it was un-drivable due to drone. I had a muffler shop install a J pipe and zero in cab drone, I regularly drove it out of state.

Done give up on it just put a J pipe in you will love it, I will dig up a photo of mine to show you. it is just a pipe which is capped at the end and the frequency bounces back and cancels itself out. There is a lot of information on the internet on selecting the correct length for the drone RPM.

iostorm · 01-04-2016, 08:28 AM

I will find a video of driving at 70 drone free.

jondancer · 01-04-2016, 08:37 AM

Is the j before or after the muffler?

iostorm · 01-04-2016, 10:51 AM

After the mufflers at the tail pipe

chevy72blu · 01-04-2016, 12:32 PM

I have dynomax super turbos piped straight out the rear and they are a bit loud behind a stock LS1. No drone and they sound awesome, but I wish I went a bit quieter. YMMV

**invicta455** · 01-07-2016, 01:59 PM

i know the feeling on flowmaster

drewbert41 · 01-07-2016, 04:25 PM

I think I am going to get some Porter Steel Pac mufflers.

01-03-2016, 09:01 PM	#51
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,787	Re: Flowmasters getting on my nerves... - I had 40 knockoffs put on the '67 Panel Truck with the LS1/4l60e. The pipes are all the way back and angled out the sides. My hearing is pretty bad and the drone still drives me nuts. I am planning on driving it on some long trips so I am going to have them replaced next Spring, but I don't know what to put on it. I have been thinking about stock type mufflers with electric cutouts. I have 3 or 4 months to think about it.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

01-03-2016, 09:38 PM	#52
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Flowmasters getting on my nerves... I gave up running Flowmasters for a couple reasons. The first one being that I had to replace the muffler way to many times, due to the sidewalls cracking and breaking open and second, due to the sound being too much of a drone to be comfortable. I now run Magnaflow stainless steel mufflers and I get the longevity that I want and the sound is right about where I want it for daily driving. Loud when you are hard on the pedal and a rumble when you are not. __________________ Frank

01-04-2016, 12:59 AM	#53
drewbert41 Registered User Join Date: Aug 2015 Location: Champaign, IL Posts: 491	Re: Flowmasters getting on my nerves... What model Magnaflows are you guys running?

01-04-2016, 08:25 AM	#54
iostorm Registered User Join Date: Oct 2015 Location: Grafton Ohio Posts: 94	Re: Flowmasters getting on my nerves... I had the American Thunder system on my Challenger, it was un-drivable due to drone. I had a muffler shop install a J pipe and zero in cab drone, I regularly drove it out of state. Done give up on it just put a J pipe in you will love it, I will dig up a photo of mine to show you. it is just a pipe which is capped at the end and the frequency bounces back and cancels itself out. There is a lot of information on the internet on selecting the correct length for the drone RPM. Attached Images

01-04-2016, 08:28 AM	#55
iostorm Registered User Join Date: Oct 2015 Location: Grafton Ohio Posts: 94	Re: Flowmasters getting on my nerves... I will find a video of driving at 70 drone free.

01-04-2016, 08:37 AM	#56
jondancer Registered User Join Date: Jul 2010 Location: central michigan Posts: 1,194	Re: Flowmasters getting on my nerves... Is the j before or after the muffler?

01-04-2016, 10:51 AM	#57
iostorm Registered User Join Date: Oct 2015 Location: Grafton Ohio Posts: 94	Re: Flowmasters getting on my nerves... After the mufflers at the tail pipe

01-04-2016, 12:32 PM	#58
chevy72blu Registered User Join Date: Apr 2004 Location: Las Vegas, NV Posts: 2,188	Re: Flowmasters getting on my nerves... I have dynomax super turbos piped straight out the rear and they are a bit loud behind a stock LS1. No drone and they sound awesome, but I wish I went a bit quieter. YMMV __________________ RIP EastSideLowLife '72 C20 SWB convert. 5 lug, LS1/4l60e

01-07-2016, 01:59 PM	#59
invicta455 Senior Member Join Date: May 2009 Location: greensboro north carolina Posts: 536	Re: Flowmasters getting on my nerves... i know the feeling on flowmaster

01-07-2016, 04:25 PM	#60
drewbert41 Registered User Join Date: Aug 2015 Location: Champaign, IL Posts: 491	Re: Flowmasters getting on my nerves... I think I am going to get some Porter Steel Pac mufflers.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.