Fender Gasket Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 01-14-2016, 03:48 PM

Is there a company that sells the gaskets for the front fender spacers shown below?:

forestb · 01-14-2016, 05:12 PM

for the L shaped peaces I think you are supposed to use peaces of the same whether stripping you use between the inner fenders and the fire wall. I don't think anyone sells them for the flat peaces. I think you will have to make your own.

BR3W CITY · 01-14-2016, 08:48 PM

I bought the gaskets etc in a roll from LMC if I remember. The L stuff is a different texture than you'd think when its new, its not as hard as the stuff you'll be removing. I also went and got some 3m 08475 seam sealer tape. Its a waaay better modern compound compared to old fender welting (that stuff can hold moisture) and it resists chafing and vibration.

I use it on the spots that the old "gasket" doesn't really protect. I really like it if you've altered panel fitment at all, or made changes to any of the structure (bcuz hot rodding happens) and need a way to keep it all snug and rattle free.

balesjb · 01-14-2016, 09:21 PM

LMC would your best bet.

**The Rocknrod** · 01-15-2016, 09:56 AM

Thanks guys, looks like LMC is the place.

01-14-2016, 03:48 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Fender Gasket Question Is there a company that sells the gaskets for the front fender spacers shown below?: __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

01-14-2016, 05:12 PM	#2
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: Fender Gasket Question for the L shaped peaces I think you are supposed to use peaces of the same whether stripping you use between the inner fenders and the fire wall. I don't think anyone sells them for the flat peaces. I think you will have to make your own.

01-14-2016, 08:48 PM	#3
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Fender Gasket Question I bought the gaskets etc in a roll from LMC if I remember. The L stuff is a different texture than you'd think when its new, its not as hard as the stuff you'll be removing. I also went and got some 3m 08475 seam sealer tape. Its a waaay better modern compound compared to old fender welting (that stuff can hold moisture) and it resists chafing and vibration. I use it on the spots that the old "gasket" doesn't really protect. I really like it if you've altered panel fitment at all, or made changes to any of the structure (bcuz hot rodding happens) and need a way to keep it all snug and rattle free. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

01-14-2016, 09:21 PM	#4
balesjb Registered User Join Date: Feb 2015 Location: Indianapolis, IN Posts: 32	Re: Fender Gasket Question LMC would your best bet.

01-15-2016, 09:56 AM	#5
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Fender Gasket Question Thanks guys, looks like LMC is the place. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.