The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-27-2016, 08:12 PM   #1
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
'59 Headlight Question

Hey Guys,

I'm restoring my '59 headlight buckets (cleaning, painting and new adjusters).....

Question: Is the 3 prong headlight placed on the "outside" headlight bucket? Is the 3 prong headlight the "regular" light?

Essentially, the 3 prong light is the "regular" headlight and the 2 prong headlight is the inside of the bucket "bright" light (combined with the regular outside headlight)?

Hope this makes sense.
Thanks
Tod
Tod59 is offline   Reply With Quote
Old 01-27-2016, 08:34 PM   #2
_Ogre
Registered User
 
_Ogre's Avatar
 
Join Date: Jan 2012
Location: Motown
Posts: 7,680
Re: '59 Headlight Question

3 prong is hi/low, 2 prong is hi only, 3 prong to the outside
low beam is only one bulb, hi beam is both on hi
new adjusters make all the difference and they're cheap too
__________________
cool, an ogre smiley Ogre's 58 Truk build

how to put your truck year and build thread into your signature
shop air compressor timer
_Ogre is offline   Reply With Quote
Old 01-27-2016, 08:37 PM   #3
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: '59 Headlight Question

Thank you.
Tod59 is offline   Reply With Quote
Old 01-28-2016, 07:15 PM   #4
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: '59 Headlight Question

Clean up, paint, new wire and adjusters. I got my adjusters from a place off ebay called Florida Fastners. $9 for 4 (will do both 55-57 or 1 58-59), if you watch they have free shipping now and then. The adjusters are thicker than the original but use the same screw end configuration to fit the stock headlamp. Wire harness came from Classic Parts has all the right grommets, etc. Tan is outside, green inside.
Attached Images
 
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 01-28-2016, 07:23 PM   #5
Tod59
Registered User
 
Join Date: Nov 2014
Location: Michign
Posts: 175
Re: '59 Headlight Question

Thanks! However, I bought some used buckets from a place in Canada and ordered a new set of adjusters at the same time. I found that I had to chase the threads in the plastic adjusters with a 1/4-28 fine thread tap so the adjuster screws would screw in.

Sounds like you got a good deal on the cost. Thanks for your help.

Next year I plan on rewiring the truck with an AAW kit.
Tod59 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:07 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com