The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-14-2016, 06:54 AM   #1
kaysboat
Registered User
 
Join Date: Jul 2013
Location: Nova Scotia
Posts: 27
Weird "bucking" issue

I'm starting to have an intermittent (although more frequent) "bucking" issue with my 1980 C10. (250 straight six, three on the tree). Initially when I start driving it drives very smooth and normal. Sometimes after 5-10 minutes I start getting a relatively major shaking/shimmy through what feels like the drive line. (When I engage the clutch and rev the engine engine is smooth and sounds normal, although shaking continues).

The shaking inceases and decreases with associated speed changes. Usually I pull over for a minute (leaving the truck running), then the problem almost always fixes itself. Sometimes it is fine for the remainder of the drive, sometimes the issue starts again in a few minutes.

I just had the clutch replaced in the fall, and had the flywheel machined at that time. The only issue I can see currently with the truck is a small hole in the exhaust pipe (about the size of a dime) just in front of the muffler (have to get that fixed up soon). Although I doubt that would cause such an issue, but I'm not sure. All wheel weights are still on the wheels (although I don't see how a wheel weight flying off would cause an intermittent issue).

Any thoughts?
kaysboat is offline   Reply With Quote
Old 03-14-2016, 08:17 AM   #2
'76 Big Block
Registered User
 
Join Date: Aug 2011
Location: Rockport, Tx.
Posts: 79
Re: Weird "bucking" issue

Was the throw-out bearing replaced when the clutch was replaced?
How much free play do you have before the clutch engages?
The shaking with the clutch engaged indicates clutch/bearing issues (to me)----good luck!
'76 Big Block is offline   Reply With Quote
Old 03-14-2016, 08:42 AM   #3
kaysboat
Registered User
 
Join Date: Jul 2013
Location: Nova Scotia
Posts: 27
Re: Weird "bucking" issue

The throw out bearing was replaced
I meant to say "disengage the clutch" and rev the engine. Engine runs smooth even with the clutch disengaged, but shaking persists.
kaysboat is offline   Reply With Quote
Old 03-14-2016, 09:07 AM   #4
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,734
Re: Weird "bucking" issue

Sounds like your heat riser is stuck or not working and you have a cold intake plenum.
How long do you let it warm up before you drive away?
geezer#99 is online now   Reply With Quote
Old 03-14-2016, 11:55 AM   #5
kaysboat
Registered User
 
Join Date: Jul 2013
Location: Nova Scotia
Posts: 27
Re: Weird "bucking" issue

I usually let it warm up for 2-5 minutes. Basically once it no longer would stall without giving it a bit of gas.
kaysboat is offline   Reply With Quote
Old 03-14-2016, 12:19 PM   #6
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,734
Re: Weird "bucking" issue

Is your motor all stock?
Is it an integral head motor?
After you stop and sit a bit and it fixes itself, does it run much better after that with no bucking sensation?
geezer#99 is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:19 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com