|
03-17-2016, 03:49 PM
|
#1 |
|
Registered User
Join Date: Mar 2010
Location: Chandler,Tx
Posts: 78
|
Neutral safety switch
I'm almost ready to put a 4.8/4L60E in my 64. I've already put a later model van tilt column in. My question is which switch do I use, the one on the column or the one mounted to the side of th transmission ? Thanks for any help.
|
|
|
|
03-17-2016, 11:50 PM
|
#2 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Neutral safety switch
If you have the original wiring for it, it might be easier to use the one on the trans. This is assuming you are keeping the EFI.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-20-2016, 10:05 PM
|
#3 |
|
Registered User
Join Date: Mar 2010
Location: Chandler,Tx
Posts: 78
|
Re: Neutral safety switch
Yes sir I am keeping it fuel injected. I ordered a harness from PSI and an American Autowire kit too. Not sure if the PSI has connections for it or not
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
