The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-18-2016, 02:56 PM   #1
Robznob11
Registered User
 
Robznob11's Avatar
 
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
sinister cam w/ tune and injectors done

https://youtu.be/Z6B_t2HSTuM

So here is what the new cam sounds like with the new 42# injectors and racetronix fuel pump installed. I had jesse retune it and set my idle to 900 so it sounds more aggressive and will stall less. I like it a lot better with the new injectors and pump. it does not have the strong gas smell like it used to, that makes your eyes water. my only concern is that now I have the racetronix pump my cheap fuel psi gage on the fuel rail is reading 65+ psi. not sure if I need a regulator or if the cheap ebay gauge just sux. It seems to run just fine and I don't smell any raw fuel to speak of. I assume that all the injectors are firing fine too not sure how to tell if they were not. other than a temp gun on each primary. which I don't have.
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride!
........................ ___
.........________//__{\_____
,,,,,,,/__(⊙)___//___/__(O)_/

@disciple2.rc 💪instagram💪
LED TAILS
Robznob11 is offline   Reply With Quote
Old 03-18-2016, 03:05 PM   #2
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: sinister cam w/ tune and injectors done

Sounds good...I like
mongocanfly is offline   Reply With Quote
Old 03-18-2016, 04:03 PM   #3
Custom 68
Registered User
 
Custom 68's Avatar
 
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,939
Re: sinister cam w/ tune and injectors done

sounds great.
__________________
Dave
1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap
1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?)
"A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome".
"If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"
Custom 68 is offline   Reply With Quote
Old 03-18-2016, 05:42 PM   #4
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: sinister cam w/ tune and injectors done

Sounds good...I like
mongocanfly is offline   Reply With Quote
Old 03-20-2016, 10:42 AM   #5
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: sinister cam w/ tune and injectors done

As long as your tune compensates for the 65PSI you should be alright. If not, you are probably putting in more fuel than the computer thinks and can screw up your fuel trims. How is your mileage?
Hart_Rod is offline   Reply With Quote
Old 03-20-2016, 10:46 AM   #6
Robznob11
Registered User
 
Robznob11's Avatar
 
Join Date: Feb 2004
Location: brownfield texas (west texas)
Posts: 1,936
Re: sinister cam w/ tune and injectors done

Well it's tuned for 58 psi. Don't know on mileage supposed to go in for paint next week. I think I may need to check the gauge first. If it's good I may need to replace that regulator. I can't imagine that pump over powering it that much. It stayed on straight up 58 with stock pump but would fall off with load making me lean. Definitely something to look into.
__________________
The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride!
........................ ___
.........________//__{\_____
,,,,,,,/__(⊙)___//___/__(O)_/

@disciple2.rc 💪instagram💪
LED TAILS
Robznob11 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com