|
03-26-2016, 04:55 PM
|
#1 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Poly on my wood bed
What are you guys using to coat your wood bed after staining? I was told to use this stuff
 Amazon.com : Epifanes Clear Varnish : Epifanes...Thoughts?
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart  My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
03-27-2016, 11:45 AM
|
#2 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Poly on my wood bed
Just bringing back up to get some feed back
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
03-27-2016, 03:53 PM
|
#3 |
|
Registered User
Join Date: Feb 2016
Location: Pelham NH
Posts: 61
|
Re: Poly on my wood bed
I used something very similar we used 5 coats.
it took a day in between each coat |
|
|
|
|
03-27-2016, 04:20 PM
|
#4 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Poly on my wood bed
Did you sand between coats?
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
03-27-2016, 04:27 PM
|
#5 |
|
Registered User
Join Date: Feb 2016
Location: Pelham NH
Posts: 61
|
Re: Poly on my wood bed
yes I did with 220 grit sandpaper.
it looks like a boat very thick but If I wanted to I could put something in the back with out worrying about hurting the wood. Mind you nothing but a grill and chairs will ever be going in there. Tailgating at The New England Patriots games. |
|
|
|
|
03-27-2016, 04:34 PM
|
#6 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Poly on my wood bed
Thanks. Do I have to drill the sides of the edge boards and the front of the boards by the cab? I have the main mounting holes predrilled.
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
03-27-2016, 04:56 PM
|
#7 |
|
Gentleman Jim Driver
Join Date: Nov 2002
Location: Poulsbo, WA
Posts: 1,553
|
Re: Poly on my wood bed
__________________
Joe '75 GMC Gentleman Jim '84 Chev C10 Short Wide - Super duper plain (manual steering, manual brakes, no dome light, no cig lighter) '85 Chev C10 Short Wide - Super plain Vortec 4.8 4L60E trans also: '81 K30, '83 C30 Crew Dually, '84 M1028 CUCV, '85 M1009 CUCV, another '85 C10 SWB, '89 R3500 Flatbed |
|
|
|
03-27-2016, 05:01 PM
|
#8 |
|
Registered User
Join Date: Feb 2016
Location: Pelham NH
Posts: 61
|
Re: Poly on my wood bed
"Thanks. Do I have to drill the sides of the edge boards and the front of the boards by the cab? I have the main mounting holes predrilled."
The angle strips are factory welded in with bolts welded in place. Everything I read said do not remove the Angle strips or bolts that are welded in place. So I etched out the bolt holes and slid the boards under the Angle strips |
|
|
|
|
03-27-2016, 05:51 PM
|
#9 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: Poly on my wood bed
I used marine grade about 4 coats sanding in between
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
03-27-2016, 07:35 PM
|
#10 | |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Poly on my wood bed
Quote:
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
|
03-27-2016, 07:53 PM
|
#11 |
|
Registered User
Join Date: Feb 2016
Location: Pelham NH
Posts: 61
|
Re: Poly on my wood bed
if my memory serves me correct we had to cut in 9 holes for only the 2 edge boards. this allowed the to slide under and the metal strips hold them down.
the strips not holding down the angle we bought bigger 2" Fender Washer stainless for even more support |
|
|
|
|
03-27-2016, 08:03 PM
|
#12 |
|
Registered User
Join Date: Feb 2016
Location: Pelham NH
Posts: 61
|
Re: Poly on my wood bed
Chris
I drew up something very crude on my pc ( not to scale) The black lines represent holes cut in the wood. Circles represent the cut out for the bed to frame bolts. Now if you managed to remove the colts from the angle strips you will not have to slot the wood but would be able to drill it instead. Most of the time you ( even if you have bough a pre drilled kit) Will have to slot. I know someone that has built a few step sides and when we were milling the wood he said your going to need to slot the wood. We thought he was wrong in the end we had to. |
|
|
|
|
03-27-2016, 08:40 PM
|
#13 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Poly on my wood bed
Perfect. Thanks for the illustration. My bed is completly apart. I think I should be able to drill holes and not have to slot them. Thanks for all the help. Hoping to get it ready for install here in the next week or so
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
03-29-2016, 07:21 AM
|
#14 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Poly on my wood bed
How much poly should I need? Quart?
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
03-29-2016, 07:37 AM
|
#15 |
|
Registered User
Join Date: Feb 2016
Location: Pelham NH
Posts: 61
|
Re: Poly on my wood bed
I bought a Gallon and have about 1/2 left..
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
