The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-01-2016, 12:10 AM   #1
Joe Z
Registered User
 
Join Date: May 2014
Location: Plymouth Pa
Posts: 94
Straight 6 random power loss?

I've had the truck and issues here and there for about 6 years now and recently started having some odd power loss. It's a short bed 2wd 250ci truck with the Muncie 4 speed. It's a rolling rebuild with all new plugs, wires, carb rebuild, the whole works. but after having a new factory style exhaust installed I started to notice a slight power loss here and there I thought was just from not running open pipes. Now at random it losses all power and the farther I press the peddle the closer it comes to stalling. But if I let off it slowly climbs back to idle and stays there til' I try and accelerate again. But it doesn't just do it when hot or cold and it doesn't always do it for a long period of time. Is it possible the exhaust is clogged or the cat is bad or am I missing something? Thanks.
Joe Z is offline   Reply With Quote
Old 04-01-2016, 08:29 AM   #2
Oberon67
Registered User
 
Join Date: Mar 2016
Location: N/A
Posts: 146
Re: Straight 6 random power loss?

Are you running the original Rochester Varajet 2-barrel carb? It sounds like you may have lost your accelerator pump.
Oberon67 is offline   Reply With Quote
Old 04-01-2016, 03:29 PM   #3
Joe Z
Registered User
 
Join Date: May 2014
Location: Plymouth Pa
Posts: 94
Re: Straight 6 random power loss?

Yeah but it was rebuilt last year. How would I check for that?
Joe Z is offline   Reply With Quote
Old 04-01-2016, 06:59 PM   #4
Oberon67
Registered User
 
Join Date: Mar 2016
Location: N/A
Posts: 146
Re: Straight 6 random power loss?

Uncertain. I'm sure someone else here can tell you.
Oberon67 is offline   Reply With Quote
Old 04-01-2016, 10:02 PM   #5
Joe Z
Registered User
 
Join Date: May 2014
Location: Plymouth Pa
Posts: 94
Re: Straight 6 random power loss?

Thanks for giving me a place to start. I'm going to unhook the exhaust and see if it still does it while straight piped and if so I have an extra carb that I can put on to check if the the problem remains or not.
Joe Z is offline   Reply With Quote
Old 04-02-2016, 05:29 AM   #6
D13
Registered User
 
D13's Avatar
 
Join Date: Feb 2007
Location: Memphis MI
Posts: 1,851
Re: Straight 6 random power loss?

Also ignition. Sudden change in ignition timing caused by bad ESC system (if ex-California car) or worn distributor shaft bushings. Check for excessive pllay in the shaft or a lot of damage / carbon tracking in the cap.
__________________
1987 2 ton
1982 250/TH350 beater in progress
Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping
Plus a mess o' tractors
D13 is offline   Reply With Quote
Old 04-02-2016, 10:17 AM   #7
Joe Z
Registered User
 
Join Date: May 2014
Location: Plymouth Pa
Posts: 94
Re: Straight 6 random power loss?

Everything is new in the distributor. I redid the entire ignition system over the winter last year so it shouldn't be that. I haven't touched the timing yet because I planned on having the motor professionally rebuilt this year.
Joe Z is offline   Reply With Quote
Old 04-03-2016, 06:11 PM   #8
cheap
Registered User
 
Join Date: Jul 2015
Location: earth
Posts: 99
Re: Straight 6 random power loss?

if you give it gas and it falls on it's face, a culprit could be a bad accelerator pump, like it's a little light. I rebuilt a carb on my 250 and still had the same problem, so i switched to a different one and it cleared up. Not sure if that's the issue, other may provide more help
cheap is offline   Reply With Quote
Old 04-25-2016, 03:31 AM   #9
Joe Z
Registered User
 
Join Date: May 2014
Location: Plymouth Pa
Posts: 94
Re: Straight 6 random power loss?

Between work and weather I just got to work on the truck over the weekend. Apparently buying a fuel pump four years ago (according to the receipt) and not realizing it was never put on can have negative consequences. Seems to have been the problem but a good work out will tell. Thanks for the advice though, never know when it'll be needed.
Joe Z is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com