TN Long bed frame / cross members - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Grumpy old man** · 07-10-2016, 11:36 AM

I have a nice straight long bed manual frame coil spring , .373 rear good trailing arms ,drum brakes $350.00

**Grumpy old man** · 07-11-2016, 07:18 AM

Ttt

**Grumpy old man** · 07-13-2016, 05:21 PM

Ttt

**Grumpy old man** · 07-15-2016, 10:25 PM

Ttt

**Grumpy old man** · 07-17-2016, 01:04 PM

zzz

**Grumpy old man** · 08-05-2016, 02:01 PM

**Grumpy old man** · 08-11-2016, 06:42 AM

Last week before I part it out .

firedemon · 08-11-2016, 08:24 PM

id love the trailing arms . a lil poor at the moment but shoot me a price to 13354 see if I can swing it somehow

**Grumpy old man** · 08-12-2016, 01:24 PM

Quote:

Originally Posted by firedemon

id love the trailing arms . a lil poor at the moment but shoot me a price to 13354 see if I can swing it somehow

I have a few extra sets , I'll check them out later today .
Posted via Mobile Device

firedemon · 08-13-2016, 09:37 PM

thanks

reb162 · 08-17-2016, 09:53 AM

If you part it out, what do you want for both (L and R) Rear Upper Spring Mount Perches/Brackets and are they in good shape? These are the brackets on the underside of the shock mount crossmemebr that connect the crossmember to the frame.

Thanks!
-Bob

**Grumpy old man** · 08-17-2016, 01:33 PM

Quote:

Originally Posted by reb162

If you part it out, what do you want for both (L and R) Rear Upper Spring Mount Perches/Brackets and are they in good shape? These are the brackets on the underside of the shock mount crossmemebr that connect the crossmember to the frame.

Thanks!
-Bob

Make me an offer I can't refuse ...I have a few parts frames and a ton of pieces , Whats the going rate today ?

**Grumpy old man** · 08-17-2016, 01:37 PM

Quote:

Originally Posted by firedemon

id love the trailing arms . a lil poor at the moment but shoot me a price to 13354 see if I can swing it somehow

I didn't forget about you ,I'm just running behind with the Temps here running in the high 90's everything is taking longer to get done ,Getting old sux !

reb162 · 08-17-2016, 06:25 PM

I have seen the spring mounts go for anywhere from $25 pair (pitted) to $50 pair for pristine (minimal pitting and straight) - I'd be good with that range.

I'm looking for ones that are straight (mine got bent from corrosion forming between them and frame) and good thickness/no severe pitting. Pics would help if you have any.

Just so we are on the same page, the z shaped brackets below are what I'm after..they attach the shock crossmember to the frame from below (riveted to frame and crossmember)

**Grumpy old man** · 08-17-2016, 06:32 PM

I'll do $50 + shipping for a clean set , if you want them pm me a phone #and I'll send pictures
Posted via Mobile Device

reb162 · 08-17-2016, 06:39 PM

PM sent...thx

firedemon · 08-17-2016, 08:26 PM

Quote:

Originally Posted by Grumpy old man

I didn't forget about you ,I'm just running behind with the Temps here running in the high 90's everything is taking longer to get done ,Getting old sux !

its ok like I said I'm a little tight on funds so it gets me a lil time to put some aside

**Grumpy old man** · 08-19-2016, 11:44 AM

Quote:

Originally Posted by firedemon

its ok like I said I'm a little tight on funds so it gets me a lil time to put some aside

No problem ,I'll have a set for you whenever your ready .

**Grumpy old man** · 08-19-2016, 11:46 AM

Quote:

Originally Posted by reb162

I have seen the spring mounts go for anywhere from $25 pair (pitted) to $50 pair for pristine (minimal pitting and straight) - I'd be good with that range.

I'm looking for ones that are straight (mine got bent from corrosion forming between them and frame) and good thickness/no severe pitting. Pics would help if you have any.

Just so we are on the same page, the z shaped brackets below are what I'm after..they attach the shock crossmember to the frame from below (riveted to frame and crossmember)

1 Set of spring perches sold to reb162 $58.00 shipped ,Thanks

**Grumpy old man** · 08-20-2016, 08:50 PM

ttt

firedemon · 08-20-2016, 10:36 PM

Quote:

Originally Posted by Grumpy old man

No problem ,I'll have a set for you whenever your ready .

cool just shoot me a price

Theboatandcarman · 08-21-2016, 04:20 PM

looking for the rear 18"-2' of a c20 coil spring frame. do you have anything of that nature? thanks!

**Grumpy old man** · 08-21-2016, 05:00 PM

Quote:

Originally Posted by Theboatandcarman

looking for the rear 18"-2' of a c20 coil spring frame. do you have anything of that nature? thanks!

All I have are C-10 frames
Posted via Mobile Device

Theboatandcarman · 08-21-2016, 05:40 PM

Quote:

Originally Posted by Grumpy old man

All I have are C-10 frames
Posted via Mobile Device

darn. thanks!

reb162 · 08-25-2016, 09:54 PM

Received my spring perch mount brackets today! Great shape and fast shipping. Thanks!

07-10-2016, 11:36 AM	#1
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Long bed frame / cross members I have a nice straight long bed manual frame coil spring , .373 rear good trailing arms ,drum brakes $350.00 __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop Last edited by Grumpy old man; 08-11-2016 at 06:41 AM.

07-11-2016, 07:18 AM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members Ttt __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-13-2016, 05:21 PM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members Ttt __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-15-2016, 10:25 PM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members Ttt __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

07-17-2016, 01:04 PM	#5
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members zzz __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-05-2016, 02:01 PM	#6
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-11-2016, 06:42 AM	#7
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members Last week before I part it out . __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-11-2016, 08:24 PM	#8
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: Long bed frame / cross members id love the trailing arms . a lil poor at the moment but shoot me a price to 13354 see if I can swing it somehow

08-13-2016, 09:37 PM	#10
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: Long bed frame / cross members thanks

08-17-2016, 09:53 AM	#11
reb162 Registered User Join Date: May 2013 Location: Beavercreek, OH Posts: 81	Re: Long bed frame / cross members If you part it out, what do you want for both (L and R) Rear Upper Spring Mount Perches/Brackets and are they in good shape? These are the brackets on the underside of the shock mount crossmemebr that connect the crossmember to the frame. Thanks! -Bob __________________ 1971 Chevy C-10 Currently is rust repair

08-17-2016, 06:25 PM	#14
reb162 Registered User Join Date: May 2013 Location: Beavercreek, OH Posts: 81	Re: Long bed frame / cross members I have seen the spring mounts go for anywhere from $25 pair (pitted) to $50 pair for pristine (minimal pitting and straight) - I'd be good with that range. I'm looking for ones that are straight (mine got bent from corrosion forming between them and frame) and good thickness/no severe pitting. Pics would help if you have any. Just so we are on the same page, the z shaped brackets below are what I'm after..they attach the shock crossmember to the frame from below (riveted to frame and crossmember) __________________ 1971 Chevy C-10 Currently is rust repair

08-17-2016, 06:32 PM	#15
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members I'll do $50 + shipping for a clean set , if you want them pm me a phone #and I'll send pictures Posted via Mobile Device __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-17-2016, 06:39 PM	#16
reb162 Registered User Join Date: May 2013 Location: Beavercreek, OH Posts: 81	Re: Long bed frame / cross members PM sent...thx __________________ 1971 Chevy C-10 Currently is rust repair

08-20-2016, 08:50 PM	#20
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Long bed frame / cross members ttt __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

08-21-2016, 04:20 PM	#22
Theboatandcarman Registered User Join Date: Aug 2015 Location: Harleysville, PA Posts: 398	Re: Long bed frame / cross members looking for the rear 18"-2' of a c20 coil spring frame. do you have anything of that nature? thanks!



Register or Log In To remove these advertisements.

08-25-2016, 09:54 PM	#25
reb162 Registered User Join Date: May 2013 Location: Beavercreek, OH Posts: 81	Re: Long bed frame / cross members Received my spring perch mount brackets today! Great shape and fast shipping. Thanks! __________________ 1971 Chevy C-10 Currently is rust repair

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.