IA 73-80 pulse delay conversion kits 2 left... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*gmachinz* · 07-21-2016, 12:58 PM

I have 2 of these kits left at the moment-delays have been tested, includes a conversion harness and a diagram. Must use 78-up motor and motor linkage arm. $90 shipped each just like the last batch!
73-77 sorry.

bluex · 07-22-2016, 12:02 AM

Do you have a good delay module an switch for the 78 an up?

*gmachinz* · 07-22-2016, 02:18 AM

Yes I do....several in fact. $50 shipped if you'd like one!

covingtontn · 07-22-2016, 07:18 PM

Hey G

Do you have a pic of the conversion and harness?
Thanks
John

*gmachinz* · 07-22-2016, 08:33 PM

Here's a pic...

*gmachinz* · 07-22-2016, 08:37 PM

This is a stock 1977 2-speed wiper motor....you need to change this out for a 1978-up motor....and the wiper motor linkage arm is different too-they don't interchange so you need to use a 1978-up arm/nut as well due to the threaded shaft on the 1978-up motors being slightly bigger-the pivot ball which attaches to the linkage arm assembly is the same for all 1973-87 tho.

*gmachinz* · 07-22-2016, 08:40 PM

On the same 1977 GMC High Sierra truck, here is the 1978 motor and new harness leads all tested and ready to go! In my lot I also provide instructions for swapping out leads on the cab side of the fuse panel bulkhead connector too!

covingtontn · 07-22-2016, 10:04 PM

Hello G

Con this conversion be changed to work with a vehicle with updated steering column with the wipers on the column.
Thanks
John

*gmachinz* · 07-22-2016, 10:22 PM

Well the 84-up trucks have a different design where the stalk has the delay feature built in and there is a pulse delay circuit board integrated into the whole circuit too-not sure if it is even worth trying to make work ya know...? What year/type of wiper switch are you thinking about?

bluex · 07-22-2016, 10:40 PM

Quote:

Originally Posted by gmachinz

Yes I do....several in fact. $50 shipped if you'd like one!

Yes please! Pm me the info, thanks!

covingtontn · 07-22-2016, 10:40 PM

Hi
I have a 71 chevy truck and I wanted to put a 84 chevy column in it.
If you think this would work let me know.
John

*gmachinz* · 07-22-2016, 11:11 PM

Quote:

Originally Posted by covingtontn

Hi
I have a 71 chevy truck and I wanted to put a 84 chevy column in it.
If you think this would work let me know.
John

Let me do a little research on it....it's possible but I need to verify a few things about this kind of swap first.

*gmachinz* · 07-22-2016, 11:12 PM

Quote:

Originally Posted by bluex

Yes please! Pm me the info, thanks!

Ok...PM coming....

covingtontn · 07-22-2016, 11:35 PM

Thanks G

If you come up with anything, please let me know. I would be happy to pay for one that would work on my 84 to 71 conversion.

Thanks
John

*gmachinz* · 07-22-2016, 11:37 PM

Ok...I'm actually researching it now....I'll compare the two systems to see if I can come up with a plan for ya! If so, I'll bench test it using a prototype harness and we can go from there with a finished "kit" for ya!

covingtontn · 07-22-2016, 11:42 PM

That sounds great.
Thanks
John

covingtontn · 07-23-2016, 12:08 AM

PM me if you come up with something good.

crewcabshorty · 07-23-2016, 02:44 PM

Looking to put delay wipers on my 1982 c -20 . will these work ?

*gmachinz* · 07-23-2016, 04:10 PM

I have delay modules on hand w/o the conversion harness adapter for use on 73-77 trucks and these will directly swap out with your existing wiper switch! $50 shipped if you'd like one of those! PM me if interested!

05duramaxhd · 07-23-2016, 11:01 PM

Got my package thanks!!

*gmachinz* · 07-23-2016, 11:04 PM

Quote:

Originally Posted by 05duramaxhd

Got my package thanks!!

You are very welcome!

covingtontn · 07-24-2016, 12:32 PM

Quote:

Originally Posted by gmachinz

Ok...I'm actually researching it now....I'll compare the two systems to see if I can come up with a plan for ya! If so, I'll bench test it using a prototype harness and we can go from there with a finished "kit" for ya!

Hi G

Just checking in to see how the research is coming along on my possible new harness.
Thanks
John

Tiger Joe · 07-24-2016, 08:41 PM

Do you still have any of these left?

We have a 79 so I assume it would be a "plug and play" since it already has the correct motor.

*gmachinz* · 07-24-2016, 09:29 PM

Quote:

Originally Posted by Tiger Joe

Do you still have any of these left?

We have a 79 so I assume it would be a "plug and play" since it already has the correct motor.

Yes I do Joe! $50 to jenwood77@mchsi.com and I'll get one going your way!

Tiger Joe · 07-25-2016, 07:27 AM

I'll take one, sending PM

07-21-2016, 12:58 PM	#1
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	73-80 pulse delay conversion kits 2 left... I have 2 of these kits left at the moment-delays have been tested, includes a conversion harness and a diagram. Must use 78-up motor and motor linkage arm. $90 shipped each just like the last batch! 73-77 sorry.

07-22-2016, 12:02 AM	#2
bluex Registered User Join Date: Jun 2004 Location: Spartanburg, SC Posts: 1,963	Re: 73-80 pulse delay conversion kits 2 left... Do you have a good delay module an switch for the 78 an up? __________________ Paul '78 GMC Serria 15 Heavy Half. 361/NV3500/3.73. Former LWB NV3500 swap Trailing arm swap '98 ECSB Z71 daily driver -traded '03 burb. Family cruiser http://upstategmtrucks.com/

07-22-2016, 02:18 AM	#3
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Yes I do....several in fact. $50 shipped if you'd like one!

07-22-2016, 07:18 PM	#4
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hey G Do you have a pic of the conversion and harness? Thanks John

07-22-2016, 08:33 PM	#5
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Here's a pic... Attached Images

07-22-2016, 08:37 PM	#6
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... This is a stock 1977 2-speed wiper motor....you need to change this out for a 1978-up motor....and the wiper motor linkage arm is different too-they don't interchange so you need to use a 1978-up arm/nut as well due to the threaded shaft on the 1978-up motors being slightly bigger-the pivot ball which attaches to the linkage arm assembly is the same for all 1973-87 tho. Attached Images

07-22-2016, 08:40 PM	#7
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... On the same 1977 GMC High Sierra truck, here is the 1978 motor and new harness leads all tested and ready to go! In my lot I also provide instructions for swapping out leads on the cab side of the fuse panel bulkhead connector too! Attached Images

07-22-2016, 10:04 PM	#8
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hello G Con this conversion be changed to work with a vehicle with updated steering column with the wipers on the column. Thanks John

07-22-2016, 10:22 PM	#9
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Well the 84-up trucks have a different design where the stalk has the delay feature built in and there is a pulse delay circuit board integrated into the whole circuit too-not sure if it is even worth trying to make work ya know...? What year/type of wiper switch are you thinking about?

07-22-2016, 10:40 PM	#11
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Hi I have a 71 chevy truck and I wanted to put a 84 chevy column in it. If you think this would work let me know. John

07-22-2016, 11:35 PM	#14
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... Thanks G If you come up with anything, please let me know. I would be happy to pay for one that would work on my 84 to 71 conversion. Thanks John

07-22-2016, 11:37 PM	#15
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... Ok...I'm actually researching it now....I'll compare the two systems to see if I can come up with a plan for ya! If so, I'll bench test it using a prototype harness and we can go from there with a finished "kit" for ya!

07-22-2016, 11:42 PM	#16
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... That sounds great. Thanks John

07-23-2016, 12:08 AM	#17
covingtontn Registered User Join Date: Jul 2015 Location: covington tennessee Posts: 153	Re: 73-80 pulse delay conversion kits 2 left... PM me if you come up with something good.

07-23-2016, 02:44 PM	#18
crewcabshorty Registered User Join Date: Jan 2012 Location: greenville pa 16125 Posts: 283	Re: 73-80 pulse delay conversion kits 2 left... Looking to put delay wipers on my 1982 c -20 . will these work ?



Register or Log In To remove these advertisements.

07-23-2016, 04:10 PM	#19
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: 73-80 pulse delay conversion kits 2 left... I have delay modules on hand w/o the conversion harness adapter for use on 73-77 trucks and these will directly swap out with your existing wiper switch! $50 shipped if you'd like one of those! PM me if interested!

07-23-2016, 11:01 PM	#20
05duramaxhd Registered User Join Date: Jan 2013 Location: Newalla, OK Posts: 600	Re: 73-80 pulse delay conversion kits 2 left... Got my package thanks!!

07-24-2016, 08:41 PM	#23
Tiger Joe Registered User Join Date: Mar 2015 Location: South of Pittsburgh Posts: 428	Re: 73-80 pulse delay conversion kits 2 left... Do you still have any of these left? We have a 79 so I assume it would be a "plug and play" since it already has the correct motor.

07-25-2016, 07:27 AM	#25
Tiger Joe Registered User Join Date: Mar 2015 Location: South of Pittsburgh Posts: 428	Re: 73-80 pulse delay conversion kits 2 left... I'll take one, sending PM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.