My 1968 Suburban fuel tank mod for 2003 Module - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72MARIO · 07-24-2016, 10:33 PM

WellI really wanted the ECE suburban 31 gallon tank but with the exchange rate and shipping it was going to be over $1700 Canadian. I tried a 1987 suburban and blazer tank but it hung down to low.

So I modified the stock tank to accept the 2003 module keeping with the theme of GM factory reliability.

Problem I had was with the fuel gauge not being a 0-90 ohm. Now a 1998 grand prix board has a 0-90 ohm but it was not available in Canada under $225. This is what I cam up with

07-24-2016, 10:33 PM	#1
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	My 1968 Suburban fuel tank mod for 2003 Module WellI really wanted the ECE suburban 31 gallon tank but with the exchange rate and shipping it was going to be over $1700 Canadian. I tried a 1987 suburban and blazer tank but it hung down to low. So I modified the stock tank to accept the 2003 module keeping with the theme of GM factory reliability. Problem I had was with the fuel gauge not being a 0-90 ohm. Now a 1998 grand prix board has a 0-90 ohm but it was not available in Canada under $225. This is what I cam up with Attached Images __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.