|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-02-2016, 08:55 AM
|
#1 |
|
Registered User
Join Date: Aug 2016
Location: Kitts Hill Ohio
Posts: 32
|
Swapping 1961 and 1963 cab questions.
Good morning. I just picked up a 1963 cab to sit on a 1961 frame and didnt realize the cab mounts were different. What all is needed for this swap to work? Would the 1961 mounts work or do i need to swap out the cab mounts as well?
Thanks |
|
|
|
08-02-2016, 09:53 AM
|
#2 |
|
Check The Champ, Demonstrator
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: Swapping 1961 and 1963 cab questions.
Drill two new holes up front floor in the 63 Cab to match the dimensions of your 61 frame. The middle plateau of the cab support will be the correct position for the cab mounts. In the parts book, they stated that the 63 cabs were a replacement for 60-62 applications. Template the brake and clutch holes as well as their mounting positions for the master.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
