C20 lowered pictures

[juddss]

Do you have any more pics of this suburban. I have a 71 c20 Gmc burb that im going to lower and I may use these wheels. They look way better when its slammed.

[juddss]

Originally Posted by hdman6465

Here is a 3/4 ton that I sold a few yrs. back. spindles ,bags,notch,blocks,etc.

Some details on how you lowered it and some pics would be awesome. If its easier you could text me 315 430 0414
im going to lower my burb this winter and was gonna do a static drop but this looks sick!!!!!

[hdman6465]

The burb had dropped spindles, 2600 lb. bags,c-ed rear frame, 2 in. blocks in the rear,225-60-16 tires in front, 285-65-16 in the rear. I had that burb about 7 years with no problems of use almost every day.

[hdman6465]

Here are a couple more to get the idea.

[juddss]

Looks SICK. what air management did you use. Did you use stock control arms. Any alignment issues in the front? Do you think I could get away with no c notch or a half c notch? I want to tow my camper with it. I have a 6.0 with Cts v supercharger and cts v heads with big fat cam going in mine with a th400 and a gear vendors overdrive

[juddss]

Here is my burb and the motor.

[72freak]

I do love me some C20/C30's. I own and have owned many of them. The only problem with them especially lowered are the awful wheels. Slotted mags or steelies help but I sure wish there was something out there worth putting on them!

[juddss]

There is Intro has a HD8 series but they are crazy expensive. I like the Kidney bean, torino and twisted vista.

[hdman6465]

Juddss, I used stock control arms, no alignment issues. I think you will need a full c notch, but in towing loaded 24 ft enclosed trailers, I never did get down on the rear snubbers. You may have to trim a litlle on the back of the control arm for the lower ball joint if I remember correctly.

[hdman6465]

Also, slow air buttons, no solenoids, nothing fast, just trouble free.

[juddss]

Ok thanks man. Here are some more pics of the HD8 wheels.

[juddss]

Originally Posted by hdman6465

Juddss, I used stock control arms, no alignment issues. I think you will need a full c notch, but in towing loaded 24 ft enclosed trailers, I never did get down on the rear snubbers. You may have to trim a litlle on the back of the control arm for the lower ball joint if I remember correctly.

I want to retain my third row seat. I have a family of 6. Have any pics of what your rear floor looked like after the c notch? Also This is absolutely the lowest C20 suburban I have ever seen. Mabye even the lowest C20 truck as well.

[hdman6465]

All you have to have is a piece of flat aluminum to cover the hole in the floor. Just cutting the wood will give you enough clearance. I have seen them with a piece of inner tube with a nice trim ring on it. You can still run a seat. You dont need anything like a road grater setup for daily driving.

[steves1967]

I really like that Intro Torino wheel! Might finally be time to crack open the piggy bank! The ones in the pic below are American Racing Artillery's

[juddss]

Those actually don't look that bad. What size 18 in front 20 in back?

[dmg1981]

Here is my 1972 C20

[ATTACH][ATTACH][/ATTACH][/ATTACH]

[juddss]

Looks good man. Info on setup please. What wheels are those and what size tires.

[dmg1981]

3" lowering springs that had to be chopped to match the axle flip kit in the rear. 2 leafs were removed out if the spring pack. The wheels are ultra phantom 20x9 with nitto 255/45/20 tires. Thanks for the compliment. It rides good, just alittle stiff in the rear end.

[Nightrider]

Here is my 1984 c20 just wanted to share! Before and after!

[PepperTreeGarage]

1972 Custom Deluxe 20 Custom Camper

[Jose's 69]

I posted on this post 2 years ago. Had some 16 inch Steelies. Here she is now with 20x9 Detroit steel wheels.

[jgandara66]

Originally Posted by Jose's 69

I posted on this post 2 years ago. Had some 16 inch Steelies. Here she is now with 20x9 Detroit steel wheels.

Hi José. I was just talking about your truck yesterday . Your truck is lowered with coils only ? No dropped spindles? Thank you
Posted via Mobile Device

[SWB]

Stocks w/caps

[Jose's 69]

Originally Posted by jgandara66

Hi José. I was just talking about your truck yesterday . Your truck is lowered with coils only ? No dropped spindles? Thank you
Posted via Mobile Device

I upgraded to disc brakes up front so I ordered the kit from POL. Came with 2.5" drop spindles and I used a 1" lowering spring. In the rear I used a 4 inch drop spring and a 1.5" lowering block.

[jgandara66]

Originally Posted by Jose's 69

I upgraded to disc brakes up front so I ordered the kit from POL. Came with 2.5" drop spindles and I used a 1" lowering spring. In the rear I used a 4 inch drop spring and a 1.5" lowering block.

Thank you for the information.. I already have disc breaks 8 lug on my 68. I will look them up..I’m looking for dropped spindles
Thanks again
Posted via Mobile Device