|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-15-2016, 09:23 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Houston, Texas
Posts: 297
|
Tire Size Recommendations
OK folks so I just received my new Intro's for my 87 C10 and need tire size recommendations. I am using a step side bed (not that i think it matters but just a FYI) and Porterbuilt Stage 3 Coil over set up on the truck.
The rims are a 22x10 in the rear and 20x8.5 in the front |
|
|
|
12-15-2016, 11:49 AM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Tire Size Recommendations
22x10
285/40-22 30.9" tall 4.48" sidewall height 1.12" of tire per inch of wheel I would def double check the 10" wide wheel fitting within the step-side well @ the planned ride height. I imagine back-spacing will be critical. Closest match for the front: 20x8.5 245/45-20 28.68" tall 4.34" sidewall height 1.13" of tire per inch of wheel The dilemma will be the front height of that tire interfering w/the OE inner wheel tub. If sticking w/OE inner tubs, a 245/40-20 would be another option: 245/40-20 27.7" tall 3.85" sidewall height same 1.13" of tire per inch of wheel
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
12-15-2016, 07:53 PM
|
#3 |
|
Diggin The SquareLife
Join Date: Dec 2010
Location: garland,tx
Posts: 1,933
|
Re: Tire Size Recommendations
Need to knw how much its lowered
|
|
|
|
|
12-16-2016, 01:26 AM
|
#4 | ||
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Tire Size Recommendations
Quote:
Quote:
 ) indicates 5-6" @ the rails/off the ground with 28/F & =/<30"R tire.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
||
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
