MD Single wall top - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**richard2717** · 01-19-2017, 06:51 PM

I have a single wall top in real nice shape. Been sitting outside so needs a good scrubbing. I did a quick wash while the sun was still out earlier but needs more. No damage to the top other than a few minor chips on front edge.

Rear hatch is usable but does need work. Someone has mounted steel plates on the inside as shown in the picture and it has a crack on the outside as shown in the picture. The handle turns freely (no key) but the end latches are froze up. I have sprayed PB Blaster on them to see if they will free up.

The two front clips that bolt it to the windshield frame are there but none of the rear tie down brackets are there.

Asking $850 local pickup. Other than the two i have for my personal use it is the nicest one I have seen in a long while.
Top sold locally

.

**richard2717** · 01-19-2017, 06:52 PM

more pics

.

Paintpro · 01-20-2017, 09:18 AM

Could you send me your address so I can see how far of a drive it is. Thanks

**richard2717** · 01-20-2017, 10:38 AM

Quote:

Originally Posted by Paintpro

Could you send me your address so I can see how far of a drive it is. Thanks

I am in Salisbury MD it looks like about 16 hours each way

harrisoncole4 · 01-20-2017, 10:27 PM

Would you say the other hatch is in better shape than this one?

**richard2717** · 01-20-2017, 10:43 PM

Quote:

Originally Posted by harrisoncole4

Would you say the other hatch is in better shape than this one?

1st chance I get some decent weather I am going to remove this hatch and take a better look at it, but my tentative answer is yes I think the other hatch is in better shape. I may also send both handles out to try and have them keyed.

Richard

harrisoncole4 · 01-20-2017, 10:46 PM

Okay, I might be interested in the top, but i'll have to think it over. When you get more info on the hatch stuff keep me posted. Thanks!

pound41 · 01-21-2017, 01:14 PM

would you sell the top without the hatch

Rspaeth · 01-25-2017, 02:05 PM

I would love to buy your single wall, unfortunately I'm on the west coast in Southern California. Any ideas of how to get it here? I've never shipped anything that large cross country before. If we can find a reasonable shipper I'll buy it.

**richard2717** · 01-25-2017, 04:37 PM

Quote:

Originally Posted by pound41

would you sell the top without the hatch

would like to keep it all together right now. I am in process of going thru one of the hatches now and intend to put the best one with this top.

Quote:

Originally Posted by Rspaeth

I would love to buy your single wall, unfortunately I'm on the west coast in Southern California. Any ideas of how to get it here? I've never shipped anything that large cross country before. If we can find a reasonable shipper I'll buy it.

I don't think it would be cost effective to ship and I am not even sure if anyone would ship it

Rspaeth · 01-26-2017, 02:02 PM

Sending you a pm

NorthernMatthew · 01-26-2017, 03:59 PM

Don't suppose you have a related latch mechanism cover plate available hey?

**richard2717** · 01-26-2017, 05:21 PM

Quote:

Originally Posted by NorthernMatthew

Don't suppose you have a related latch mechanism cover plate available hey?

Not sure, let me take a look and get back to you.

Are you set on an original pc.? I can probably cut and bend one up to the proper angle as well

Richard

pound41 · 01-26-2017, 06:46 PM

Ok thanks I have a a few good hatches. So if you decide to separate let me know

NorthernMatthew · 01-27-2017, 01:10 AM

original would be nice but not necessary - it seems hard to get an original in great condition the past while I've been looking around -- let me know and thank you.

lnsrus · 01-28-2017, 12:36 AM

Richard,
I am looking for the front corner top brackets for my 1970 Blazer, I have the 2 center ones but would like to have front corners as well.
If you have them let me know how much or where I might get some.
phone # 615-499-4744
Thanks Jim

**richard2717** · 01-28-2017, 03:07 PM

Quote:

Originally Posted by lnsrus

Richard,
I am looking for the front corner top brackets for my 1970 Blazer, I have the 2 center ones but would like to have front corners as well.
If you have them let me know how much or where I might get some.
phone # 615-499-4744
Thanks Jim

Jim
The outer corner brackets are actually your sun visors. There is a bolt that goes through the sun visor to attach the top. I do not have any blazer sunvisors at this time.

Richard

**richard2717** · 01-28-2017, 03:46 PM

Quote:

Originally Posted by NorthernMatthew

original would be nice but not necessary - it seems hard to get an original in great condition the past while I've been looking around -- let me know and thank you.

The original one here is not for sale. I took it off my personal truck in order to make a sample cover out of aluminum. I did not have any lighter steel sheet here and would have to order some in order to make them out of steel. Don't mind the blue color, this was just a pc of aluminum i pulled out of the scrap barrel to make sure I could make the angled bend without too much distortion. The blue aluminum I used is .040 thick which might be a little thin for this application. I am going to look around later to see if I have any .063 or .080 scrap laying around. The cost of the material is pretty much nothing but between labor and shipping they would probably be $30 each.

.

NorthernMatthew · 01-29-2017, 01:43 AM

I'll take one for sure --- I have a brother in Boise that is heading up to Canada for our Dad's birthday soon, you could send to him. See what you can do to expedite this please and PM me your payment information Richard, much appreciated.

**richard2717** · 01-29-2017, 08:18 AM

Quote:

Originally Posted by NorthernMatthew

I'll take one for sure --- I have a brother in Boise that is heading up to Canada for our Dad's birthday soon, you could send to him. See what you can do to expedite this please and PM me your payment information Richard, much appreciated.

Sending pm

**richard2717** · 01-29-2017, 04:58 PM

Quote:

Originally Posted by NorthernMatthew

I'll take one for sure --- I have a brother in Boise that is heading up to Canada for our Dad's birthday soon, you could send to him. See what you can do to expedite this please and PM me your payment information Richard, much appreciated.

Matt,
Got a good one made up this afternoon. Sent you a pm as well. Here are pics of it vs my original on my hatch

.

**richard2717** · 01-29-2017, 05:02 PM

The top in the original listing is being removed from being for sale for the time being.
thanks
Richard

Paintpro · 01-29-2017, 08:24 PM

Can you put me first in line when you relist it.

NorthernMatthew · 01-30-2017, 11:36 AM

Looks FANTASTIC Richard, thank you very much indeed! Have a great week too!

01-19-2017, 06:51 PM	#1
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,133	Single wall top I have a single wall top in real nice shape. Been sitting outside so needs a good scrubbing. I did a quick wash while the sun was still out earlier but needs more. No damage to the top other than a few minor chips on front edge. Rear hatch is usable but does need work. Someone has mounted steel plates on the inside as shown in the picture and it has a crack on the outside as shown in the picture. The handle turns freely (no key) but the end latches are froze up. I have sprayed PB Blaster on them to see if they will free up. The two front clips that bolt it to the windshield frame are there but none of the rear tie down brackets are there. Asking $850 local pickup. Other than the two i have for my personal use it is the nicest one I have seen in a long while. Top sold locally . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 01-28-2018 at 12:44 PM.

01-19-2017, 06:52 PM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,133	Re: Single wall top more pics . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

01-20-2017, 09:18 AM	#3
Paintpro Registered User Join Date: Nov 2008 Location: Hermann, MO Posts: 28	Re: Single wall top Could you send me your address so I can see how far of a drive it is. Thanks

01-20-2017, 10:27 PM	#5
harrisoncole4 Registered User Join Date: Sep 2015 Location: St.Thomas, ON Posts: 320	Re: Single wall top Would you say the other hatch is in better shape than this one? __________________ 1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858

01-20-2017, 10:46 PM	#7
harrisoncole4 Registered User Join Date: Sep 2015 Location: St.Thomas, ON Posts: 320	Re: Single wall top Okay, I might be interested in the top, but i'll have to think it over. When you get more info on the hatch stuff keep me posted. Thanks! __________________ 1969 K5 Blazer - 507 Light Blue - http://67-72chevytrucks.com/vboard/s...d.php?t=802858

01-21-2017, 01:14 PM	#8
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Single wall top would you sell the top without the hatch

01-25-2017, 02:05 PM	#9
Rspaeth Registered User Join Date: Mar 2015 Location: Newbury park, ca Posts: 85	Re: Single wall top I would love to buy your single wall, unfortunately I'm on the west coast in Southern California. Any ideas of how to get it here? I've never shipped anything that large cross country before. If we can find a reasonable shipper I'll buy it.

01-26-2017, 02:02 PM	#11
Rspaeth Registered User Join Date: Mar 2015 Location: Newbury park, ca Posts: 85	Re: Single wall top Sending you a pm

01-26-2017, 03:59 PM	#12
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Re: Single wall top Don't suppose you have a related latch mechanism cover plate available hey?

01-26-2017, 06:46 PM	#14
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Re: Single wall top Ok thanks I have a a few good hatches. So if you decide to separate let me know

01-27-2017, 01:10 AM	#15
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Re: Single wall top original would be nice but not necessary - it seems hard to get an original in great condition the past while I've been looking around -- let me know and thank you.

01-28-2017, 12:36 AM	#16
lnsrus Registered User Join Date: Jan 2017 Location: Hermitage, Tn. Posts: 6	Re: Single wall top Richard, I am looking for the front corner top brackets for my 1970 Blazer, I have the 2 center ones but would like to have front corners as well. If you have them let me know how much or where I might get some. phone # 615-499-4744 Thanks Jim

01-29-2017, 01:43 AM	#19
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Re: Single wall top I'll take one for sure --- I have a brother in Boise that is heading up to Canada for our Dad's birthday soon, you could send to him. See what you can do to expedite this please and PM me your payment information Richard, much appreciated.

01-29-2017, 05:02 PM	#22
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,133	Re: Single wall top The top in the original listing is being removed from being for sale for the time being. thanks Richard __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type. Last edited by richard2717; 12-20-2017 at 01:10 PM.

01-29-2017, 08:24 PM	#23
Paintpro Registered User Join Date: Nov 2008 Location: Hermann, MO Posts: 28	Re: Single wall top Can you put me first in line when you relist it.



Register or Log In To remove these advertisements.

01-30-2017, 11:36 AM	#24
NorthernMatthew Registered User Join Date: Jan 2016 Location: Sherwood Park, Alberta Posts: 426	Re: Single wall top Looks FANTASTIC Richard, thank you very much indeed! Have a great week too!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.