Window info please

[José Antonio]

Originally Posted by rhodog77

i picked up the brackets at summit when i got the radiator. Here is the link

http://www.summitracing.com/parts/SUM-380100/?rtype=10

I dont have any pix but I will take some and post.

Hello Group
I'm restoring my pickup chevy 3100 but i's very dificult to buy all parts, it's possible post the dimensions the radiator support the chevy 3100.
Internal and nexternal dimensions. I'll contruct one. The simple drawn in centimeters, help me.
I found the drawn but dont have the measurements in centimeters
It's possible help me.
Best regards
sabadini

[iowaboynca]

Welcome!

Can't really help with dimensions and what not, but I can offer some advice. You may want to look at getting the assembly and shop manuals from back in the day. Amazon has them. (See link)

https://www.amazon.com/REPAIR-SERVIC...ck+shop+manual

While they don't offer dimensions, you can see how everything goes together, and eyeball it. If you're going to have to fab a bunch of your parts you're going to have to eyeball a bunch anyway.

Good luck and welcome.

[José Antonio]

Hello
Thanks very much for your advice, I'll buy this manual assembly but I will need the dimensions. I hope other member can post the dimensions, realy I need construct this part.
I created one image to help put the dimensions.

Thanks so much
Sabadini

[mr48chev]

I had to look that one up, I see that Sorocaba is in Brazil.

I've got a couple out back behind the shed but they are buried in snow right now and I am not sure if they are 3000 or 4000 series. it would be Thursday or Friday before I can get back there to check.

Someone has to have one of those sitting out in his nice warm garage that he can photograph and take good measurements though. How bout it folks lets help the gent from way down south.

[José Antonio]

Hello, I'm in Sorocaba - São Paulo Brazil
Thanks so much for your comment, I really like the American car, i see every week the restauration car in Discovery Chanel.
If is possible take a picture and put the mensures I'll be grateful.

Best regards

Sabadini

[butchp]

Multiple dim by 25.4 will turn the dim. Into metric do opposit to get american dim. Divide

[mr48chev]

There are tape measures that show metric down one edge and inch down the other.
A Stanley 33-428 will do that. https://www.amazon.com/Stanley-33-42.../dp/B00002X2GR

I'll try to get out back and dig out that core support and get some measurements. The snow has melted some so I might be able to make it back there in the morning.