AD core support measurements. ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 02-02-2017, 01:29 AM

Call it old dude itis if he didn't ask on here but someone somewhere was looking for the measurements for a 3100 truck core support and even gave a diagram. The morning I was going out back and measure mine we got 3 inches of new snow so I shoveled snow rather than dig my way to the back.

Unless it melts this week the ninth will mark two straight months of six inches or more snow on the ground here.

**jweb** · 02-02-2017, 07:15 PM

It was here, http://67-72chevytrucks.com/vboard/s...d.php?t=728341

**mr48chev** · 02-03-2017, 01:36 AM

Thanks. If we don't get more snow tonight or in the morning I'll dig my way out back and do some measuring. I need to look at the back side of the wood shed anyhow to see how it is holding up.

The back side of this shed is where the core support is and you can see my snow blower inside the shed.
I should say what used to be a shed but now I don't have to get on top of it to tear it down this spring to build my shop in the same spot.

02-02-2017, 01:29 AM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	AD core support measurements. ??? Call it old dude itis if he didn't ask on here but someone somewhere was looking for the measurements for a 3100 truck core support and even gave a diagram. The morning I was going out back and measure mine we got 3 inches of new snow so I shoveled snow rather than dig my way to the back. Unless it melts this week the ninth will mark two straight months of six inches or more snow on the ground here. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

02-02-2017, 07:15 PM	#2
jweb Senior Member Join Date: Apr 2010 Location: Oregon Posts: 1,208	Re: AD core support measurements. ??? It was here, http://67-72chevytrucks.com/vboard/s...d.php?t=728341

02-03-2017, 01:36 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: AD core support measurements. ??? Thanks. If we don't get more snow tonight or in the morning I'll dig my way out back and do some measuring. I need to look at the back side of the wood shed anyhow to see how it is holding up. The back side of this shed is where the core support is and you can see my snow blower inside the shed. I should say what used to be a shed but now I don't have to get on top of it to tear it down this spring to build my shop in the same spot. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.