MO 250 cu. in. I6 parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clatterville trolley** · 03-13-2017, 10:22 PM

I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it.
Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these.

The list of parts:

Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride
Exhaust manifold with free moving heat riser. $40 plus ride
Intake manifold with heat tube, carb., linkage. $55 plus ride
May also have an air cleaner if it is correct one - you identify $35 plus ride
Clutch cover tins (had 3 spd. trans.) $20 plus ride
Flywheel with good starter ring - no buggered up teeth. $30 plus ride
Clutch housing for standard shift trans. $45 plus ride
Clutch throw out arm. $15 plus ride
Harmonic balancer. $20 plus ride
**SOLD**Extra belt pulley that bolts to balancer - has slight ding, but can be straightened easily?

Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad.

Will try to get some photos in the next couple of days. Jay

**Grumpy old man** · 03-14-2017, 08:09 AM

Quote:

Originally Posted by Clatterville trolley

I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it.
Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these.

The list of parts:

Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride
Exhaust manifold with free moving heat riser. $40 plus ride
Intake manifold with heat tube, carb., linkage. $55 plus ride
May also have an air cleaner if it is correct one - you identify $35 plus ride
Clutch cover tins (had 3 spd. trans.) $20 plus ride
Flywheel with good starter ring - no buggered up teeth. $30 plus ride
Clutch housing for standard shift trans. $45 plus ride
Clutch throw out arm. $15 plus ride
Harmonic balancer. $20 plus ride
Extra belt pulley that bolts to balancer - has slight ding, but can be straightened easily?

Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad.

Will try to get some photos in the next couple of days. Jay

How much for the extra belt pulley ? shipped to 37938

**Clatterville trolley** · 03-14-2017, 01:14 PM

What do you think about $22 shipped?

**Grumpy old man** · 03-14-2017, 01:18 PM

I'll take it , pm paypal info

Pm payment info
Posted via Mobile Device

1971c10La · 03-14-2017, 01:33 PM

Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

**Clatterville trolley** · 03-14-2017, 07:30 PM

Quote:

Originally Posted by 1971c10La

Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

Pretty sure flywheel would not work as it is for a clutch / standard shift set-up and generally the flywheel for an automatic is a totally different style in almost any usage.
I will get a photo of the air cleaner as soon as I can for you. Jay

**Clatterville trolley** · 03-15-2017, 02:50 PM

Quote:

Originally Posted by 1971c10La

Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

Here are photos of air cleaner. I thought I had the lid as well and still think so, but didn't have any luck locating it today. Jay

Name: IMG_0308.jpg
Views: 247
Size: 62.4 KB

Name: IMG_0308.jpg
Views: 247
Size: 62.4 KB

Name: IMG_0309.jpg
Views: 248
Size: 63.0 KB

Name: IMG_0310.jpg
Views: 249
Size: 71.7 KB

Name: IMG_0311.jpg
Views: 244
Size: 72.5 KB

**Clatterville trolley** · 03-15-2017, 02:53 PM

Have photos now of other parts listed for sale in this ad:

Name: IMG_0299.JPG
Views: 241
Size: 85.1 KB

Name: IMG_0300.JPG
Views: 241
Size: 86.7 KB

Name: IMG_0302.JPG
Views: 243
Size: 96.2 KB

Name: IMG_0303.JPG
Views: 242
Size: 82.4 KB

Name: IMG_0304.JPG
Views: 240
Size: 92.5 KB

**Clatterville trolley** · 03-15-2017, 02:54 PM

Final one:

Name: IMG_0305.JPG
Views: 225
Size: 96.9 KB

**Clatterville trolley** · 03-15-2017, 02:55 PM

Quote:

Originally Posted by Grumpy old man

I'll take it , pm paypal info

Pm payment info
Posted via Mobile Device

Grumpy - got your payment and part will go out in next couple of days. Thanks for purchase, Jay

RickDeVon · 03-15-2017, 07:05 PM

If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you

**Clatterville trolley** · 03-15-2017, 08:19 PM

Quote:

Originally Posted by RickDeVon

If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you

I will check it tonight and let you know, but it is an original one so I think it will have the script. Thanks, Jay

JAP51 · 03-15-2017, 10:17 PM

I need an oil pan if not to rusty .

**Clatterville trolley** · 03-15-2017, 10:40 PM

Quote:

Originally Posted by JAP51

I need an oil pan if not to rusty .

Got one, does have a dent in the bottom - should come out OK. Jay

RickDeVon · 03-16-2017, 02:46 PM

I also need a coil bracket....Thanks Rick

JAP51 · 03-16-2017, 02:50 PM

How much for oil pan ?

**Clatterville trolley** · 03-16-2017, 05:31 PM

Quote:

Originally Posted by RickDeVon

If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you

Sorry - checked valve cover and no script on it. Good shape though. Jay

**Clatterville trolley** · 03-16-2017, 05:33 PM

Quote:

Originally Posted by RickDeVon

I also need a coil bracket....Thanks Rick

I know I have a coil bracket because I remember taking it off. $10 and that includes cost of shipping. Jay

**Clatterville trolley** · 03-16-2017, 05:34 PM

Quote:

Originally Posted by JAP51

How much for oil pan ?

$25 and ride to you. Jay

RickDeVon · 03-16-2017, 05:52 PM

Quote:

Originally Posted by Clatterville trolley

I know I have a coil bracket because I remember taking it off. $10 and that includes cost of shipping. Jay

Sounds great and let me know about the valve cover...

JAP51 · 03-16-2017, 06:31 PM

I want the oil pan and the clutch cover tin. Can I pay by paypal? If so, please send info.

**Clatterville trolley** · 03-16-2017, 06:32 PM

Quote:

Originally Posted by RickDeVon

Sounds great and let me know about the valve cover...

Check up a little higher in the ad where I responded to you with the quote - about script valve cover. Jay

**Clatterville trolley** · 03-16-2017, 06:41 PM

Quote:

Originally Posted by JAP51

I want the oil pan and the clutch cover tin. Can I pay by paypal? If so, please send info.

PM'd you with P/P info. Jay

RickDeVon · 03-16-2017, 06:46 PM

Quote:

Originally Posted by Clatterville trolley

Check up a little higher in the ad where I responded to you with the quote - about script valve cover. Jay

Sorry I missed that...Just send pm on pay pal on coil bracket...thanks Rick

RickDeVon · 03-16-2017, 08:02 PM

Payment sent...thank you Rick

03-13-2017, 10:22 PM	#1
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	250 cu. in. I6 parts for sale I pulled the six cylinder engine out of a 1967 parts truck I had to make it easier to remove the cab for another project. I had always wondered if it was reusable or not, so I disassembled it. Block was cracked in two or three places. Therefore, I decided to offer up some of the good parts to help out anyone rebuilding one of these. The list of parts: Crankshaft - looks good haven't put a mic to it, but everything shiny with no galling or hot spots, etc. $50 plus ride Exhaust manifold with free moving heat riser. $40 plus ride Intake manifold with heat tube, carb., linkage. $55 plus ride May also have an air cleaner if it is correct one - you identify $35 plus ride Clutch cover tins (had 3 spd. trans.) $20 plus ride Flywheel with good starter ring - no buggered up teeth. $30 plus ride Clutch housing for standard shift trans. $45 plus ride Clutch throw out arm. $15 plus ride Harmonic balancer. $20 plus ride SOLDExtra belt pulley that bolts to balancer - has slight ding, but can be straightened easily? Anything that you are interested in but want to make an offer - offer away!! Not starting a museum, intend to sell these. Thanks for checking my ad. Will try to get some photos in the next couple of days. Jay Last edited by Clatterville trolley; 03-15-2017 at 02:56 PM. Reason: some parts sold

03-14-2017, 01:14 PM	#3
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 250 cu. in. I6 parts for sale What do you think about $22 shipped?

03-14-2017, 01:18 PM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 250 cu. in. I6 parts for sale I'll take it , pm paypal info Pm payment info Posted via Mobile Device Last edited by Grumpy old man; 03-14-2017 at 06:01 PM.

03-14-2017, 01:33 PM	#5
1971c10La Registered User Join Date: Feb 2016 Location: Mer Rouge la Posts: 72	Re: 250 cu. in. I6 parts for sale Can you post a pic of air cleaner please also would the fly wheel work on a 230 with a auto transmission thanks

03-15-2017, 02:53 PM	#8
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 250 cu. in. I6 parts for sale Have photos now of other parts listed for sale in this ad:

03-15-2017, 02:54 PM	#9
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,934	Re: 250 cu. in. I6 parts for sale Final one:

03-15-2017, 07:05 PM	#11
RickDeVon Registered User Join Date: Aug 2015 Location: Pine Mountain, Georgia Posts: 125	Re: 250 cu. in. I6 parts for sale If the Valve Cover has the Chevrolet script I will take it to 31831...if anyone sees this and has one... I want it...thank you __________________ 71 C10 I6 250 TH350 power steering and power breaks...

03-15-2017, 10:17 PM	#13
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale I need an oil pan if not to rusty .

03-16-2017, 02:46 PM	#15
RickDeVon Registered User Join Date: Aug 2015 Location: Pine Mountain, Georgia Posts: 125	Re: 250 cu. in. I6 parts for sale I also need a coil bracket....Thanks Rick __________________ 71 C10 I6 250 TH350 power steering and power breaks...

03-16-2017, 02:50 PM	#16
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale How much for oil pan ?

03-16-2017, 06:31 PM	#21
JAP51 Registered User Join Date: Jun 2016 Location: Walnut Hill, Fl Posts: 14	Re: 250 cu. in. I6 parts for sale I want the oil pan and the clutch cover tin. Can I pay by paypal? If so, please send info.

03-16-2017, 08:02 PM	#25
RickDeVon Registered User Join Date: Aug 2015 Location: Pine Mountain, Georgia Posts: 125	Re: 250 cu. in. I6 parts for sale Payment sent...thank you Rick __________________ 71 C10 I6 250 TH350 power steering and power breaks...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.