|
03-18-2017, 11:33 PM
|
#1 |
|
Registered User
Join Date: Mar 2017
Location: Aberdeen,id
Posts: 2
|
1977 k10 suburban
My suburban is a all time 4wd I went to start it and let it warm up and I shifted it Into neutral to let all fluid to cycle and my vehicle warm up after a bit I went to shift into into reverse and then I started to free roll forward and no gears will engage. Every time I try engage gear it whines and after about 30 seconds stops whining and whines in any gear I try to shift into and all gears stopped working at same time the transmission is a th350 fluid is at right level a little dark red color and and looking for ways to troubleshoot my problem I am am planning on changing fluid and filter and was wondering what all else I can try to see if is a easy fix or not that may get it driving again. Any help please????
|
|
|
|
03-19-2017, 06:45 AM
|
#2 |
|
Registered User
Join Date: May 2011
Location: Goliad, TX
Posts: 672
|
Re: 1977 k10 suburban
Make sure your transfer case is not in neutral.
__________________
1990 ¾ ton 4x4 Chevy Suburban -Cummins Diesel - 12 valve - factory rebuilt -6 speed bullet proof manual transmission - NV5600 -Gear Vendors Overdrive - HX35 Holset Turbo -NP205 iron transfer case -3.73 gears -2" Lift |
|
|
|
|
03-19-2017, 08:24 PM
|
#3 |
|
Registered User
Join Date: Mar 2017
Location: Aberdeen,id
Posts: 2
|
Re: 1977 k10 suburban
Thank you for the I found out that was the problem.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
