i need pics hey just look

[chevy68388]

i am wanting some pics of 67-72 truck or bazer with a4 -8 inch lift please put what lift it is how high and what size tires trying to see what would look best on my 68 im thinking 6 with my 35s

[Yukon Jack]

Here are a couple pics of my truck next to a C10.





My tires are 35 x 12.50 x 16 Super Swamper SSR's on 16 x 8 rims.

The front lift is a combination of 4" Tuff Country lift springs up front with an added 3/8" spring and I have also added a center pinned lift block that has 2 1/2 degree angle in it. The block is 5" long, 2" wide and roughly 1 1/4" tall, measured at the center of the axle. From the top of the tire to the highest point of the front wheel well measures 13".

The back suspension consists of Offroad Design's Shackle Flip which gains 4" of lift using the stock springs. Recently I pulled out a broken leaf and added 2 1/2 inches of additional leafs to gain some weight hauling capacity. That netted a total of 7 1/2" rear lift.

------------------
1969 C20 4x4 with roughly 6" lift and 35's
residing near Rose Hill, Kansas

Yukon Jack's Web Pages



[This message has been edited by Yukon Jack (edited March 01, 2002).]

[LeRoy]

My Blazer has a combination of a 4" Rancho lift and 3" Rough Country body lift. I also added another overload to the rear for an addition 3/4". Right now I'm running 36x14.50x16.50 Swamper radials on 10x16.50 rims. When the rigs at full suspension drop. I get front of rear wheel well contact.

------------------
MOUNT VERNON, WASH. STATE
GOT MY BASES COVERED
-Big and bad 70 CST Blazer
-71 K5 Blazer, 350, 4spd, 2" lift, 35" BFG mudders, Camo,
-Work in progress 72 SWB
-72 Cheyenne, lwb, 1/2 ton, 4x4, V8, 4spd.
-71, 3/4 ton, 402/400, Custom Camper
-69, 2wd, ST6, auto, ghetto lowered, 3/4 ton, LWB, "BOMBER"
-69 Chev., lwb, utility trailer, 35" tires,
Add or Delete Daily




[This message has been edited by LeRoy (edited March 01, 2002).]

[chevy68388]

wow both of u have nice trucks i realy like that flat bed im in the pross of puting one on my 68 and that blazer wow realy nice hey if one of u can tell me how to post a pic i will send one of mine to see her shes rough right now just got done swaping moters took off the bumpers and wating for my lift to come

[Yukon Jack]

The following is copied from another post:

The picture first has to be uploaded to a web site (msn, free photo-i etc.). Once you have it on a web site you want to go to that site and make the picture large (no thumbnail). Right click on the picture and go to "properties" at the bottom of the window. Highlight the address (URL) and then right click on the highlighted address. Select "copy".
Now, come back to this site and start your post. To get the picture to show up here you will need to paste (right click and then select "paste") the address (URL) in your post with this in front of it..... [img] and this right after it........ [/img]

So it should look something like this:
[img] www.mypicture.com/filename.jpg [/img]



[This message has been edited by Yukon Jack (edited March 01, 2002).]

[Pont]

Here's my 67 with 8" lift. The front springs are Skyjacker SoftRide. The rear springs were custom built. Rancho RS9000's with a Pro Comp dual steering stabilizer. I did away with the factory steering setup and went with crossover steering. The wheels are 15x14 Weld Typhoons and the tires are 35x14.5x15 Super Swamper SSR radials. Also went with Earls stainless braided brake hoses. More to come soon...........


------------------
67 SWB 4x4 - 396 BB / SM420 4 spd
8" lift / 15x14 Welds & 35X14.5 SSR's
Grants Pass, OR