Reverse went out buy still have all forward gears - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76Silveradodriver · 05-02-2017, 12:06 AM

I have a 1976 Silverado with original 350 engine and 350 turbo. Reverse went out buy still have ALL forward gears. Can it be fixed without overhaul or changing transmission?

**mr48chev** · 05-02-2017, 01:34 AM

I don't think so but you will have to do some research.

Looking on a trouble shooting guide here is what I came up with

Copy and paste +
No Reverse

Low oil level
Check manual control linkage
Filter plugged
Modulator valve stuck
Direct sealing rings on pump hub broken or missing
Low/reverse clutch piston seals cut or missing
Number-1 check ball missing
1-2 or 2-3 valvetrain stuck
Intermediate servo piston or pin stuck so that band is applied
10.Direct clutch plates burned

76Silveradodriver · 05-02-2017, 03:07 AM

Thanks mr48chevy. I know it isn't low in fluid, but all the others give me something to check out. I can rebuild a motor from top to bottom, but never did give transmissions a try, and really don't want to, but if I have to, I will. I have another transmission, but the one in it is the original and all the forward gears work fine. Every other turbo 350 I've had, if reverse was out, usually first would be out. A friend of mine said there was a pump (?) or something like that, that was stuck. I don't know. I was just trying to get ideas before tearing into it. And you've given me a few. Thanks

05-02-2017, 12:06 AM	#1
76Silveradodriver Registered User Join Date: May 2017 Location: Stanton Posts: 2	Reverse went out buy still have all forward gears I have a 1976 Silverado with original 350 engine and 350 turbo. Reverse went out buy still have ALL forward gears. Can it be fixed without overhaul or changing transmission?

05-02-2017, 01:34 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Reverse went out buy still have all forward gears I don't think so but you will have to do some research. Looking on a trouble shooting guide here is what I came up with Copy and paste + No Reverse Low oil level Check manual control linkage Filter plugged Modulator valve stuck Direct sealing rings on pump hub broken or missing Low/reverse clutch piston seals cut or missing Number-1 check ball missing 1-2 or 2-3 valvetrain stuck Intermediate servo piston or pin stuck so that band is applied 10.Direct clutch plates burned __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

05-02-2017, 03:07 AM	#3
76Silveradodriver Registered User Join Date: May 2017 Location: Stanton Posts: 2	Re: Reverse went out buy still have all forward gears Thanks mr48chevy. I know it isn't low in fluid, but all the others give me something to check out. I can rebuild a motor from top to bottom, but never did give transmissions a try, and really don't want to, but if I have to, I will. I have another transmission, but the one in it is the original and all the forward gears work fine. Every other turbo 350 I've had, if reverse was out, usually first would be out. A friend of mine said there was a pump (?) or something like that, that was stuck. I don't know. I was just trying to get ideas before tearing into it. And you've given me a few. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.