Fitting a stainless steel hood center strip on a 48 GMC hood - The 1947 - Present Chevrolet & GMC Truck Message Board Network

48 GMC · 07-02-2017, 02:55 PM

How do I fit a stainless steel hood center strip on a 48 GMC truck? I'm concerned that I might kink the center strip.

Thanks
48 GMC

**mr48chev** · 07-02-2017, 04:51 PM

Obviously very carefully, the tabs fit down in the slots alongside the center divide and you twist them slightly with a pair of pliers on the inside while holding the strip down on the outside. It's best to have a helper but I have had the strip off an on my 48 Chevy a couple of times.

07-02-2017, 02:55 PM	#1
48 GMC Registered User Join Date: Jun 2017 Location: Elizabeth, IN Posts: 3	Fitting a stainless steel hood center strip on a 48 GMC hood How do I fit a stainless steel hood center strip on a 48 GMC truck? I'm concerned that I might kink the center strip. Thanks 48 GMC

07-02-2017, 04:51 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,713	Re: Fitting a stainless steel hood center strip on a 48 GMC hood Obviously very carefully, the tabs fit down in the slots alongside the center divide and you twist them slightly with a pair of pliers on the inside while holding the strip down on the outside. It's best to have a helper but I have had the strip off an on my 48 Chevy a couple of times. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.