5.3 swap into 72 C-10 Part list.

[WB72]

Originally Posted by 68Stepbed

No need for going to the stealership. LS1Tech has you covered in the Classified section.
https://ls1tech.com/forums/marketplace/parts/search/

I'll check them out. Always happy to support those who support the hobby.

[WB72]

I'm confused about the oil pan from the CTS-V.

2004-2005 CTS-V ran a 5.7l (LS6)
2006-2007 CTS-V ran 6.0l (LS2)
2008-2014 CTS-V ran 6.2l (LSA)

Will all or any of these oil pans fit a 5.3l (LM7)?

I just don't want to order if it will not 100% fit.

[Willie Makeit]

Originally Posted by WB72

I'm confused about the oil pan from the CTS-V.

2004-2005 CTS-V ran a 5.7l (LS6)
2006-2007 CTS-V ran 6.0l (LS2)
2008-2014 CTS-V ran 6.2l (LSA)

Will all or any of these oil pans fit a 5.3l (LM7)?

I just don't want to order if it will not 100% fit.

this is what i am using.

GM Part # 12631828 - GM 2008-2015 Cadillac CTS-V oil pan, gasket, stock baffle, and mounting hardware
GM Part # 12611129 - GM 2008-2015 Cadillac CTS-V Windage Tray
GM Part # 12584738 - GM 2008-2015 Cadillac CTS-V Oil Dip Stick Tube
GM Part # 12584737 - GM 2008-2015 Cadillac CTS-V Oil Dip Stick
GM Part # 12621299 - GM 2008-2015 Cadillac CTS-V Oil Pickup Tube

[72MARIO]

I have all the ctsv pan numbers I used in my suburban build thread.

[Tork?]

You can use the v8 perches but you'll need the one bolt mounts. 73-up perches allow you to use the clamshell mounts which are preferred. I think they'll let the engine sit just a tad bit lower too

[WB72]

Originally Posted by Willie Makeit

this is what i am using.

GM Part # 12631828 - GM 2008-2015 Cadillac CTS-V oil pan, gasket, stock baffle, and mounting hardware
GM Part # 12611129 - GM 2008-2015 Cadillac CTS-V Windage Tray
GM Part # 12584738 - GM 2008-2015 Cadillac CTS-V Oil Dip Stick Tube
GM Part # 12584737 - GM 2008-2015 Cadillac CTS-V Oil Dip Stick
GM Part # 12621299 - GM 2008-2015 Cadillac CTS-V Oil Pickup Tube

This will help me out, I needed the descriptions, Thanks.

For what it is worth, the Canadian GM dealership says the part numbers change from US dealers to Canadian Dealers.

[WB72]

Originally Posted by 72MARIO

I have all the ctsv pan numbers I used in my suburban build thread.

You have a 6.0l in your Burb, is there a difference in the 5.3l block?

[Willie Makeit]

Originally Posted by WB72

You have a 6.0l in your Burb, is there a difference in the 5.3l block?

no

[StingRay]

I used the numbers I got off a US vendors site and there was no need to cross up. Also everything I found said the stock truck windage tray works with the CTSV pan.

[NC_John]

Originally Posted by WB72

This will help me out, I needed the descriptions, Thanks.

For what it is worth, the Canadian GM dealership says the part numbers change from US dealers to Canadian Dealers.

I think you need to find a new parts guy.

[WB72]

I called another shop, they were happy to use these part numbers. Sometimes i wonder how these parts "people" can keep their jobs. Ill check stealership pricing against GMPartsDepot.ca

[NC_John]

Originally Posted by WB72

I called another shop, they were happy to use these part numbers. Sometimes i wonder how these parts "people" can keep their jobs. Ill check stealership pricing against GMPartsDepot.ca

I like getting my own part numbers online, then confirming them at the parts counter.