|
04-20-2004, 04:24 AM
|
#1 |
|
Registered User
Join Date: Apr 2004
Posts: 15
|
fender cutout
hi everybody !
does anybody know how much i would have to cut away to run bfg 35x12.50 tiers with only a two inch lift?? i was at a friends house the other day and he has a set laying around . i wanted to see what they looked like on my suburban so i jacked it up from the axle and put it in place ( i have 6 bolt hubs and the rims were 8 hole )( i have a rough country 2" lift on ) they looked real mean! i realy want to run a set but dont know how much to hack off and will i have to run a set of spacers for frame clearance? thanks for any help! lief@baysat.net brian770
__________________
1989 half ton 4x4 burb 2 inch lift 33x9.50 tirers never ending project............. |
|
|
|
04-20-2004, 09:06 AM
|
#2 |
|
City's Articulation Ramp
Join Date: Jan 2004
Location: St. Louis Missouri
Posts: 452
|
My roommates old K5 with no lift ran 35"s, he hacked the fenders about 4 or 5 inches, out past the innner wheel wells and still rub on occasion. My old truck was a 92 GMC K1500 with a 6" trail master lift and 35x12.5x15 on 15x10 rims. I hacked my fenders 3 inches and took 3 inches off the bumper to even make it out of my driveway in the city. You could probaly hack the fenders a real large amount and fit them, but you would still be rubbing. And if you aren't rubbing you aren't wheeling hard enough. Also keep in mind I drove my truck hard, but the 35s helped to destroy just about everything that sissy IFS had to offer. Just my 2 cents...
__________________
85 K90 SWB Rockwells 46x19.5 on double beadlocks 20" lift 305/sm465/NP208 Toy 00 Silverado 2wd SWB 4.8 auto 3/4 drop slamair bags esclade rims Daily Driver 06 Harley Sporster 883 low 19?? Zamboni, Really I own a Zamboni! "If your gonna be stupid, then you better be tough." |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
