|
04-24-2004, 04:31 PM
|
#1 |
|
Senior Member
Join Date: Nov 2003
Location: Calgary Alberta
Posts: 1,936
|
changing ignition
Im putting new keys in my C10, having a problem getting the old ignition out. Is there a special position for the key to be in to pull it out???? Thanks Darren
|
|
|
|
04-24-2004, 04:52 PM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
turn the switch to acc, & use a pin or small allen wrench in the small hole on the face. while pushing in on the pin, continue to turn the switch to the left, & the lock & key should pop out.
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
|
|
|
|
04-24-2004, 06:17 PM
|
#3 |
|
Senior Member
Join Date: Nov 2003
Location: Calgary Alberta
Posts: 1,936
|
got it, lots of giggling. Almost need three hands.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
