Trans crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FLO1 · 02-07-2018, 03:20 PM

I have a 86 c20 I’m doing a swap in with a 4L60E and was wondering if I needed to move my trans crossmember bracket? Or could I keep it in the same place? Thanks for the help

BR3W CITY · 02-07-2018, 04:05 PM

Hard to know 100% since that will depend on what mounts your using etc. The xmembers are pretty easy to relocate, most of the ones I've worked with just had to redrill holes and bolt back into place.

FLO1 · 02-07-2018, 08:39 PM

Thank you, I just wanted to make sure before I got to deep into it

02-07-2018, 03:20 PM	#1
FLO1 Registered User Join Date: May 2017 Location: Chandler, AZ Posts: 2	Trans crossmember I have a 86 c20 I’m doing a swap in with a 4L60E and was wondering if I needed to move my trans crossmember bracket? Or could I keep it in the same place? Thanks for the help

02-07-2018, 04:05 PM	#2
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Trans crossmember Hard to know 100% since that will depend on what mounts your using etc. The xmembers are pretty easy to relocate, most of the ones I've worked with just had to redrill holes and bolt back into place. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

02-07-2018, 08:39 PM	#3
FLO1 Registered User Join Date: May 2017 Location: Chandler, AZ Posts: 2	Re: Trans crossmember Thank you, I just wanted to make sure before I got to deep into it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.