A few trucks from the Portland Roadster Show 2018 Version - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 03-18-2018, 02:05 AM

Here are a few shots from our trip to the Portland Roadster Show. Nifty trucks and a Photo Op with Kendig and Kevdog after Jean talked me out of a shirt and had them sign it. The little cutie in the roadster stroller I couldn't pass up.
The AD woodie rocks

**mr48chev** · 03-18-2018, 02:08 AM

One for the TF brigade

**mr48chev** · 03-18-2018, 02:13 AM

Ok these are random shots and I had dinner at BJ's Brewhouse before posting them.

**mr48chev** · 03-18-2018, 02:20 AM

That Trailer in the previous post was one of two that an outfit that restores them had on display. The Betties were every where as they had a Bettie or sock hop queen or something contest going on.

The couple with the blue panel sell what they call a creeper but it is quilted fabric that runs in a loop and lets you slide under and out from under a car as it slides over it's self.

**mr48chev** · 03-18-2018, 02:28 AM

The couple in one of the photos own a chassis shop that builds some serious pieces for Chevy trucks to bag and drop them. Their company is Rydman Ranch Customs www.rydmanranch.com Nice people with some nice stuff

OG!!!! The 55 Buick Century. I had a 55 Buick Special 4 door Hardtop with a Super engine in it that was the exact same color combo in and out when I was 19 years old. Had to say that one made my heart beat go up a bit even though it was a whole lot nicer than the one I had.

MiraclePieCo · 03-18-2018, 02:38 AM

Nice photos, thanks. I really like the blue Magic Creeper panel. I guess they can afford it, selling a roll of fabric for $70.00

**mr48chev** · 03-18-2018, 02:40 AM

I'm trying to post every AD and TF that was in the show. No discrimination on rust or flaky paint.
I didn't take photos of it but there was one of what I would call a filler section that had rigs that looked like they had escaped from the junk yard this morning. There were world class show vehicles there, some nice drivers some outrageous rat rods and some just plain junk that for the life of me I can't figure out why it was there except to fill space. The AD or TF trucks that were in the show either were top rate show rigs, had some serious chassis work to go along with the patina or were dang nice driver rigs. It's some of the other rigs in one section that make you wonder.

**mr48chev** · 03-18-2018, 02:47 AM

OKAY this bike is OT I know but before you smack me it was built by one of our own. Hogfarm built this bike for a gent who is a vet an is somewhat disabled.
I got to watch him take the owner for his first ride ever in/on the bike last October. Some how the paint looks like it changed but I didn't check my other photos of it. It is just flat beautiful.

That's all folks, I'll post a link when I get all of the photos from the show in an album.

**mr48chev** · 03-18-2018, 02:57 AM

Quote:

Originally Posted by MiraclePieCo

Nice photos, thanks. I really like the blue Magic Creeper panel. I guess they can afford it, selling a roll of fabric for $70.00

50.00 show special and I came close to buying one but bought my wife two T shirts that she had the sellers autograph. One from Kendig and one from John D’Agostino two nicer guys you will never find by the way.

The show was good but there weren't as many high caliber "traveling" show cars there as are usually there. The what I thought as the main show room had a whole section of rat rods that were usually regulated to the third or fourth room. They didn't lack for work or imagination though. Lots of very nice restored super cars and several nice later model GM pickups that will show up in my album.
"

**hogfarm** · 03-18-2018, 06:44 AM

Quote:

Originally Posted by mr48chev

OKAY this bike is OT I know but before you smack me it was built by one of our own. Hogfarm built this bike for a gent who is a vet an is somewhat disabled.
I got to watch him take the owner for his first ride ever in/on the bike last October. Some how the paint looks like it changed but I didn't check my other photos of it. It is just flat beautiful.

That's all folks, I'll post a link when I get all of the photos from the show in an album.

I knew that bike was going to be there,was wondering if you saw it

**oldman3** · 03-18-2018, 10:09 AM

Thanks for posting, nice rides...Jim

DransportGarage · 03-18-2018, 10:34 AM

Quote:

Originally Posted by hogfarm

I knew that bike was going to be there,was wondering if you saw it

Great job, Hogfarm! There's something about the moment when reality collides with fantasy...

DPete · 03-18-2018, 11:34 AM

Nice photos, thanks for posting.
Posted via Mobile Device

**mr48chev** · 03-18-2018, 11:20 PM

This photo shows Hogfarm taking the owner of the bike on his first ride in/on the bike.

mtden17 · 03-19-2018, 02:27 AM

Impressive trucks and nice photos.

**gigamanx** · 03-19-2018, 08:35 AM

Thanks for the pics! This was my favorite, but those wheels gotta go.

CountofMonteCarlo84 · 03-19-2018, 01:06 PM

Thanks! Some of those TF's are to die for.

**mr48chev** · 03-20-2018, 01:00 AM

Yup I'd think it was some rough competition between the copper, gray, blue and white ones.

I couldn't get decent photos of the black and green one. I don't know if it is that spot in that building or the color combination. The other trucks didn't have to compete with him as he was in a different class.

Lo1dakota · 03-20-2018, 05:01 AM

Hey there. I'm the owner of the bagged "patina" 50

Thanks for the photos mr48chev

**mr48chev** · 03-20-2018, 07:40 PM

I looked for you after seeing your post on FB. I took a number of photos of your truck and the two with it.

**mr48chev** · 03-20-2018, 07:47 PM

I don't think I posted these earlier

**mr48chev** · 03-20-2018, 07:53 PM

Last shot is Lo1dakota's buddy stashing something in the truck, hope the judges had already been by to judge it.

Lo1dakota · 03-20-2018, 09:12 PM

Quote:

Originally Posted by mr48chev

I looked for you after seeing your post on FB. I took a number of photos of your truck and the two with it.

I think we just missed each other.

Lo1dakota · 03-20-2018, 09:14 PM

Quote:

Originally Posted by mr48chev

Last shot is Lo1dakota's buddy stashing something in the truck, hope the judges had already been by to judge it.

It was interesting comparing my truck to many of the "High End" vehicles there. It received a ton of attention, which obviously made me smile. I will likely bring it back next year as well, but it will be all finished at that time. Exterior remaining the same.

Lo1dakota · 03-20-2018, 09:19 PM

Quote:

Originally Posted by mr48chev

Last shot is Lo1dakota's buddy stashing something in the truck, hope the judges had already been by to judge it.

For some reason, my truck was "Display only" not sure why though.... Kinda bumbed about that.

03-18-2018, 02:05 AM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	A few trucks from the Portland Roadster Show 2018 Version Here are a few shots from our trip to the Portland Roadster Show. Nifty trucks and a Photo Op with Kendig and Kevdog after Jean talked me out of a shirt and had them sign it. The little cutie in the roadster stroller I couldn't pass up. The AD woodie rocks Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 02:08 AM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version One for the TF brigade Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 02:13 AM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version Ok these are random shots and I had dinner at BJ's Brewhouse before posting them. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 02:20 AM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version That Trailer in the previous post was one of two that an outfit that restores them had on display. The Betties were every where as they had a Bettie or sock hop queen or something contest going on. The couple with the blue panel sell what they call a creeper but it is quilted fabric that runs in a loop and lets you slide under and out from under a car as it slides over it's self. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 02:28 AM	#5
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version The couple in one of the photos own a chassis shop that builds some serious pieces for Chevy trucks to bag and drop them. Their company is Rydman Ranch Customs www.rydmanranch.com Nice people with some nice stuff OG!!!! The 55 Buick Century. I had a 55 Buick Special 4 door Hardtop with a Super engine in it that was the exact same color combo in and out when I was 19 years old. Had to say that one made my heart beat go up a bit even though it was a whole lot nicer than the one I had. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 02:38 AM	#6
MiraclePieCo Registered User Join Date: Sep 2014 Location: USA Posts: 2,249	Re: A few trucks from the Portland Roadster Show 2018 Version Nice photos, thanks. I really like the blue Magic Creeper panel. I guess they can afford it, selling a roll of fabric for $70.00

03-18-2018, 02:40 AM	#7
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version I'm trying to post every AD and TF that was in the show. No discrimination on rust or flaky paint. I didn't take photos of it but there was one of what I would call a filler section that had rigs that looked like they had escaped from the junk yard this morning. There were world class show vehicles there, some nice drivers some outrageous rat rods and some just plain junk that for the life of me I can't figure out why it was there except to fill space. The AD or TF trucks that were in the show either were top rate show rigs, had some serious chassis work to go along with the patina or were dang nice driver rigs. It's some of the other rigs in one section that make you wonder. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 02:47 AM	#8
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version OKAY this bike is OT I know but before you smack me it was built by one of our own. Hogfarm built this bike for a gent who is a vet an is somewhat disabled. I got to watch him take the owner for his first ride ever in/on the bike last October. Some how the paint looks like it changed but I didn't check my other photos of it. It is just flat beautiful. That's all folks, I'll post a link when I get all of the photos from the show in an album. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-18-2018, 10:09 AM	#11
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: A few trucks from the Portland Roadster Show 2018 Version Thanks for posting, nice rides...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

03-18-2018, 11:34 AM	#13
DPete Registered User Join Date: Dec 2016 Location: Farmington, Ca. Posts: 151	Re: A few trucks from the Portland Roadster Show 2018 Version Nice photos, thanks for posting. Posted via Mobile Device

03-18-2018, 11:20 PM	#14
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version This photo shows Hogfarm taking the owner of the bike on his first ride in/on the bike. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-19-2018, 02:27 AM	#15
mtden17 Registered User Join Date: Mar 2018 Location: San Jose, CA Posts: 8	Re: A few trucks from the Portland Roadster Show 2018 Version Impressive trucks and nice photos.

03-19-2018, 08:35 AM	#16
gigamanx Senior Member Join Date: Sep 2016 Location: Hershey, PA Posts: 1,004	Re: A few trucks from the Portland Roadster Show 2018 Version Thanks for the pics! This was my favorite, but those wheels gotta go. __________________ Current Build Thread 1930 Ford Model A Modern Twist: Ford Model A Rat Rod With a Modern Twist Build Thread Phase 1 "The Swap": 1949 3100 with S10 swap. Beginner build with ambition! Build Thread Phase 2 "The Drop": Beginner Build with Ambition gets Air Ride

03-19-2018, 01:06 PM	#17
CountofMonteCarlo84 Registered User Join Date: Jun 2015 Location: Longwood, FL Posts: 165	Re: A few trucks from the Portland Roadster Show 2018 Version Thanks! Some of those TF's are to die for.

03-20-2018, 01:00 AM	#18
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version Yup I'd think it was some rough competition between the copper, gray, blue and white ones. I couldn't get decent photos of the black and green one. I don't know if it is that spot in that building or the color combination. The other trucks didn't have to compete with him as he was in a different class. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.



Register or Log In To remove these advertisements.

03-20-2018, 05:01 AM	#19
Lo1dakota Registered User Join Date: Mar 2014 Location: Woodland, Wa Posts: 161	Re: A few trucks from the Portland Roadster Show 2018 Version Hey there. I'm the owner of the bagged "patina" 50 Thanks for the photos mr48chev

03-20-2018, 07:40 PM	#20
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version I looked for you after seeing your post on FB. I took a number of photos of your truck and the two with it. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-20-2018, 07:47 PM	#21
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version I don't think I posted these earlier Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-20-2018, 07:53 PM	#22
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: A few trucks from the Portland Roadster Show 2018 Version Last shot is Lo1dakota's buddy stashing something in the truck, hope the judges had already been by to judge it. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.