Is 73-87 crossmember same as 67-72???? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bagd72Chevy · 05-04-2004, 10:58 PM

I want to get an extra front crossmember to cut on. I can easilly get a 73-87 front crossmember, but will I be able to bolt all of my 72 arms, engine mounts, and spindles up to it?

Thanks,
Ryan

**raggedjim** · 05-05-2004, 11:23 AM

Yes, but there are a couple of the holes that bolt it to the frame that will need to be oblonged. I don't remember which ones, but many of the members have changed out cross members.

Rg

05-04-2004, 10:58 PM	#1
Bagd72Chevy C10 Collector Join Date: Oct 2003 Location: Baton Rouge, LA Posts: 417	Is 73-87 crossmember same as 67-72???? I want to get an extra front crossmember to cut on. I can easilly get a 73-87 front crossmember, but will I be able to bolt all of my 72 arms, engine mounts, and spindles up to it? Thanks, Ryan

05-05-2004, 11:23 AM	#2
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,485	Yes, but there are a couple of the holes that bolt it to the frame that will need to be oblonged. I don't remember which ones, but many of the members have changed out cross members. Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203 Ideas - https://67-72chevytrucks.com/vboard/...d.php?t=851743

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.