1970 K10 SB Stepside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Travisarmenta · 10-01-2018, 11:01 AM

Strait 6, Runs, Drives, Stops.

It does have rust, Its a Virginia truck.

Working out a trade right now.

I know its a Factory K10 SB Stepside.

I know pics will help with estimate, but just from info you have, what do you guys think?

Working out a trade for it

**richard2717** · 10-02-2018, 07:04 AM

without more detail it is hard to say but if good title and running driving condition should be $1500 and up imo

Travisarmenta · 10-02-2018, 11:24 AM

added pics

Mudder · 10-05-2018, 05:26 PM

I give 1500 for it.

*Harlowhead1972* · 10-08-2018, 11:29 AM

$2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

Travisarmenta · 10-09-2018, 09:28 AM

Quote:

Originally Posted by Harlowhead1972

$2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

That was my thought as well, the Strait 6 and no bed def makes it less desirable and (I actually like the bed) If i pick it up, I will most likely replace the 6.

*Harlowhead1972* · 10-09-2018, 09:58 AM

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Travisarmenta · 10-09-2018, 10:49 AM

Quote:

Originally Posted by Harlowhead1972

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

I will let you know when I find out. The SPID does not have any info on the gearing though, it does however have the 292 CI RPO.

Travisarmenta · 10-09-2018, 01:17 PM

Quote:

Originally Posted by Harlowhead1972

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Just did a little more digging, it's actually a Fleetside truck. Looks like the 205 was standard in 1970 according to GM heritage center.

And the K series came standard with 3:73 as well.

No RPOs for either gearing, nor transfer case.

It is a Z62 truck with both upper and lower moldings, so if I grab it and keep it, I might bring her back to her glory, a little at a time.

Travisarmenta · 10-10-2018, 12:06 PM

Quote:

Originally Posted by Harlowhead1972

Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

Received confirmation via pic, it is a 205. might make the deal happen by end of the week.

Travisarmenta · 10-15-2018, 10:12 AM

It's home, pics to follow in truck thread.

*Harlowhead1972* · 10-19-2018, 09:22 AM

Congrats!

10-01-2018, 11:01 AM	#1
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	1970 K10 SB Stepside Strait 6, Runs, Drives, Stops. It does have rust, Its a Virginia truck. Working out a trade right now. I know its a Factory K10 SB Stepside. I know pics will help with estimate, but just from info you have, what do you guys think? Working out a trade for it

10-02-2018, 07:04 AM	#2
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,128	Re: 1970 K10 SB Stepside without more detail it is hard to say but if good title and running driving condition should be $1500 and up imo __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

10-02-2018, 11:24 AM	#3
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 1970 K10 SB Stepside pic added added pics Attached Images

10-05-2018, 05:26 PM	#4
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: 1970 K10 SB Stepside I give 1500 for it.

10-08-2018, 11:29 AM	#5
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 1970 K10 SB Stepside $2500-3000. The lack of bed definitely hurts the value. True short bed 4x4's are getting hard to find in any condition. Harlow

10-09-2018, 09:58 AM	#7
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 1970 K10 SB Stepside Any idea on gear ratio? I'm guessing 4.11 if the six is original. It would also be interesting to see if it has the Rockwell T-case or NP205 since 1970 was a split year, maybe even the little Dana with the six? Harlow

10-15-2018, 10:12 AM	#11
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: 1970 K10 SB Stepside It's home, pics to follow in truck thread.

10-19-2018, 09:22 AM	#12
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 1970 K10 SB Stepside Congrats!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.