ME Burb rockers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**THECRAZYKIDJR** · 10-20-2018, 09:13 PM

Installing rockers in the burb tonite, noticed the front right replacement does not fit...it is fatter at the rear than the original.
Looked at LMC for reference, they don't list a RH rocker for the burb, just pickup and blazer, which is the part # that I have.
What has anybody else done?
Does anyone carry a burb specific rocker?
Thanks for the help.

**ShortbedClayton** · 10-20-2018, 09:31 PM

Quote:

Originally Posted by THECRAZYKIDJR

Installing rockers in the burb tonite, noticed the front right replacement does not fit...it is fatter at the rear than the original.
Looked at LMC for reference, they don't list a RH rocker for the burb, just pickup and blazer, which is the part # that I have.
What has anybody else done?
Does anyone carry a burb specific rocker?
I ran into the same thing. All they list is a truck rocker. And my rockers are 1/4 to 3/8 to narrow across the top. So the door edge is out over the rocker edge 3/8. I don’t know what to do except stretch the rocker
Thanks for the help.

Posted via Mobile Device

**71blksuper4x4** · 10-21-2018, 09:10 AM

To answer your question....no they don’t. You have to modify them to fit. Had to cut them up on my crew cab.

**HO455** · 11-12-2018, 02:55 PM

Do. Search in the Burban section. You will find what you seek.

10-20-2018, 09:13 PM	#1
THECRAZYKIDJR Registered User Join Date: Jun 2000 Location: GLENBURN, MAINE, USA Posts: 264	Burb rockers Installing rockers in the burb tonite, noticed the front right replacement does not fit...it is fatter at the rear than the original. Looked at LMC for reference, they don't list a RH rocker for the burb, just pickup and blazer, which is the part # that I have. What has anybody else done? Does anyone carry a burb specific rocker? Thanks for the help. __________________ JIM PARKER GLENBURN, MAINE 69 BURB 4WD - 307/4SPD/YELLOW 69 BLAZER (ORANGE / 35" SUPER SWAMPERS) 1970 CUSTOM-10

10-21-2018, 09:10 AM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Burb rockers To answer your question....no they don’t. You have to modify them to fit. Had to cut them up on my crew cab. __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

11-12-2018, 02:55 PM	#4
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,419	Re: Burb rockers Do. Search in the Burban section. You will find what you seek. __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.