Cam, lifters and pushrods - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gldevall · 05-16-2004, 10:02 PM

Brand new, never used. Replaced with Comp cam before motor was installed. Stock from the 10067353 replacement 350. Cam specs are .390"/.410" lift and dur @ .050" 195º/202º.

Cam, lifters and pushrods

$50 plus shipping.

Thought I'd try here before going to ebay.

gldevall · 06-04-2004, 08:26 AM

This is the one I should have bumped.

Street Sled · 06-04-2004, 02:04 PM

How rough is the cam? May be interested....S/S

Destructo · 06-04-2004, 02:48 PM

With that duration should be a pretty smooth idle.

Russell · 06-04-2004, 03:30 PM

Lemme see how this compares to an X4262-H comp cam, I may end up buying this if the shipping isn't too bad to Canada, and it isn't too rough of a cam :P

gldevall · 06-04-2004, 08:27 PM

Its the stock cam from the universal 350.

gldevall · 06-04-2004, 08:32 PM

Here you go Russell

Xtreme Energy XE262H Hydraulic Flat Tappet Camshaft & Lifter Kit
Lift: .462''/.469''
Duration: 262°/270°
RPM Range: 1300-5600

Cam specs are .390"/.410" lift and dur @ .050" 195º/202º.

Russell · 06-04-2004, 09:05 PM

Ah, ok, I'm looking for something a bit bigger than stock, thanks anyways though

MSL · 06-08-2004, 07:09 AM

Is this still available and if so how much for shipping to 97502.

Thanks

gldevall · 06-08-2004, 08:44 AM

Quote:

Originally Posted by MSL

Is this still available and if so how much for shipping to 97502.

Thanks

$16 shipped to 97502

MSL · 06-09-2004, 04:09 AM

sold whats your addy so i can send out a money order.

Thanks Mike

gldevall · 06-09-2004, 08:39 AM

Mike, PM sent. Thanks.

gldevall · 06-10-2004, 08:19 AM

Sale pending.

MSL · 06-10-2004, 10:05 PM

Payment sent check your paypal.

Thanks Mike

gldevall · 06-10-2004, 10:48 PM

Payment received. Cam, lifters and pushrods SOLD. Thanks again Mike.

05-16-2004, 10:02 PM	#1
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Cam, lifters and pushrods Brand new, never used. Replaced with Comp cam before motor was installed. Stock from the 10067353 replacement 350. Cam specs are .390"/.410" lift and dur @ .050" 195º/202º. Cam, lifters and pushrods $50 plus shipping. Thought I'd try here before going to ebay. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 08:26 AM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	This is the one I should have bumped. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 02:04 PM	#3
Street Sled Registered User Join Date: Oct 2003 Location: Ohio Posts: 146	Cam,etc. How rough is the cam? May be interested....S/S

06-04-2004, 02:48 PM	#4
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	With that duration should be a pretty smooth idle. __________________ 1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle.

06-04-2004, 03:30 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Lemme see how this compares to an X4262-H comp cam, I may end up buying this if the shipping isn't too bad to Canada, and it isn't too rough of a cam :P __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) Last edited by Russell; 06-04-2004 at 03:32 PM.

06-04-2004, 08:27 PM	#6
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Its the stock cam from the universal 350. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 08:32 PM	#7
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Here you go Russell Xtreme Energy XE262H Hydraulic Flat Tappet Camshaft & Lifter Kit Lift: .462''/.469'' Duration: 262°/270° RPM Range: 1300-5600 Cam specs are .390"/.410" lift and dur @ .050" 195º/202º. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-04-2004, 09:05 PM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Ah, ok, I'm looking for something a bit bigger than stock, thanks anyways though __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-08-2004, 07:09 AM	#9
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Is this still available and if so how much for shipping to 97502. Thanks

06-09-2004, 04:09 AM	#11
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	sold whats your addy so i can send out a money order. Thanks Mike

06-09-2004, 08:39 AM	#12
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Mike, PM sent. Thanks. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-10-2004, 08:19 AM	#13
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Sale pending. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

06-10-2004, 10:05 PM	#14
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Payment sent check your paypal. Thanks Mike

06-10-2004, 10:48 PM	#15
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Payment received. Cam, lifters and pushrods SOLD. Thanks again Mike.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.