|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-14-2019, 01:22 PM
|
#1 |
|
Registered User
Join Date: Mar 2019
Location: SAN RAMON
Posts: 73
|
Loose Ball Joint on Door Mirror
I know these replacements aren't that expensive - but hey - 50 bucks is 50 bucks, right?
Just curious if anyone was aware of a work-around to keep the mirror from flopping around. Driving me nuts, please let me know if you know a shade-tree solution or if I'm destined for the Classic Industries shopping cart page haha. Thanks
__________________
64 C10 Custom 70 C10 Stepside w/67 Front End Clip 1970 Buick Ragtop 2003 Anniversary Road King Classic |
|
|
|
06-14-2019, 01:35 PM
|
#2 |
|
Senior Member
 
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 724
|
Re: Loose Ball Joint on Door Mirror
My first thought would be to clean the joint as best as possible and apply wicking type Loctite. Of course this might not be the best advice as who knows how long it would hold and the adjustment will be permanent...
|
|
|
|
|
06-14-2019, 02:10 PM
|
#3 |
|
Registered User
Join Date: Mar 2019
Location: SAN RAMON
Posts: 73
|
Re: Loose Ball Joint on Door Mirror
Hey thanks! Don't mind it being permanent as i'm the only one who rolls this beauty. I'll give it a shot.
__________________
64 C10 Custom 70 C10 Stepside w/67 Front End Clip 1970 Buick Ragtop 2003 Anniversary Road King Classic |
|
|
|
|
06-14-2019, 03:17 PM
|
#4 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Loose Ball Joint on Door Mirror
I wonder (always have) if there is a tightening screw under the mirror side?
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
06-14-2019, 05:37 PM
|
#5 |
|
Senior Member
Join Date: Sep 2002
Location: Alamogordo, NM
Posts: 724
|
Re: Loose Ball Joint on Door Mirror
Hmmm, I always assumed the ball/joint assy was crimped during manufacture. I guess someone needs to sacrifice a mirror glass to see what's underneath!
|
|
|
|
|
06-14-2019, 05:50 PM
|
#6 |
|
Registered User
Join Date: Mar 2019
Location: SAN RAMON
Posts: 73
|
Re: Loose Ball Joint on Door Mirror
Thx for the replies.
I went with a little silicone after a good clean. I'll let ya know how it goes. Thx again fellas.
__________________
64 C10 Custom 70 C10 Stepside w/67 Front End Clip 1970 Buick Ragtop 2003 Anniversary Road King Classic |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
