2 wheel drive Blazer oil pan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Thealien** · 09-04-2020, 08:10 AM

Trying to get all my parts ordered for my upcoming LS3
/4L70 swap. Blazer will be lowered 3" -4" . I am assuming an oil pan is recommended? What have you guys had good luck with? CTSV? Fbody?

Thanks
Mark

Custom 68 · 09-04-2020, 08:56 AM

I used an F-body on my 2wd truck. It fit real nice.

**Thealien** · 09-07-2020, 02:33 PM

Anybody else?

verdell · 09-08-2020, 10:40 AM

I have 2.5 drop spindles and torsion bars turned down and the F-body pan worked best for me. I know a lot of guys in my club with the "muscle car" pan and some with stockers but I really think they hang too low for me. About to drop a 5.3/4L60E in my brothers '66 big window short bed this week and we're going with the F-body in it as well...

jjzepplin · 01-02-2021, 01:34 PM

F body here.

**Thealien** · 01-02-2021, 02:03 PM

Thanks, ended up going with a Holley 302-2

**kev2809** · 01-03-2021, 10:10 AM

Quote:

Originally Posted by Thealien

Thanks, ended up going with a Holley 302-2

did you go with an actual holley pan? i found a knock off with great reviews for $250. ordered it a few days ago

**Thealien** · 01-03-2021, 10:29 AM

Quote:

Originally Posted by kev2809

did you go with an actual holley pan? i found a knock off with great reviews for $250. ordered it a few days ago

I went with the actual Holley pan. I got a really good deal on it through a forum vendor But Holley was unable to ship the part for almost 90 days.I ended up paying $50 more for it and bought it from summit as they had it in stock.

**kev2809** · 01-03-2021, 01:38 PM

are you having to buy a new tube and dipstick as well? or will it depend it on the style of headers that are used?

**Thealien** · 01-03-2021, 02:27 PM

Quote:

Originally Posted by kev2809

are you having to buy a new tube and dipstick as well? or will it depend it on the style of headers that are used?

I "believe" my originals will fit. Not that far yet, but soon...

09-04-2020, 08:10 AM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	2 wheel drive Blazer oil pan Trying to get all my parts ordered for my upcoming LS3 /4L70 swap. Blazer will be lowered 3" -4" . I am assuming an oil pan is recommended? What have you guys had good luck with? CTSV? Fbody? Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

09-04-2020, 08:56 AM	#2
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	Re: 2 wheel drive Blazer oil pan I used an F-body on my 2wd truck. It fit real nice. __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

09-07-2020, 02:33 PM	#3
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: 2 wheel drive Blazer oil pan Anybody else? __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

09-08-2020, 10:40 AM	#4
verdell Registered User Join Date: Feb 2013 Location: Columbus, MS Posts: 445	Re: 2 wheel drive Blazer oil pan I have 2.5 drop spindles and torsion bars turned down and the F-body pan worked best for me. I know a lot of guys in my club with the "muscle car" pan and some with stockers but I really think they hang too low for me. About to drop a 5.3/4L60E in my brothers '66 big window short bed this week and we're going with the F-body in it as well...

01-02-2021, 01:34 PM	#5
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: 2 wheel drive Blazer oil pan F body here. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

01-02-2021, 02:03 PM	#6
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,135	Re: 2 wheel drive Blazer oil pan Thanks, ended up going with a Holley 302-2 __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

01-03-2021, 01:38 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: 2 wheel drive Blazer oil pan are you having to buy a new tube and dipstick as well? or will it depend it on the style of headers that are used? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.