IA Parting out 1979 K20 Suburban - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 12-13-2020, 02:58 AM

Quote:

Originally Posted by trukman1

Any updates on this inquiry and on the rear window switch and rear air spoiler?

I did get the spoiler off. Now I need to see if it has the rear window switch.

Greenlee · 12-13-2020, 10:02 AM

This is the part I’m looking for. Used on trucks with intermittent wiper from 78-83. I’m hunting down a problem with my wipers and already replaced everything else. Wouldn’t mind have the switch also in case the one I bought from LMC is junk.

GMC72BB · 12-15-2020, 07:49 PM

Are you keeping the seats ? I'm looking for a rear-3rd row seat

**Dieselwrencher** · 12-16-2020, 06:10 AM

Quote:

Originally Posted by GMC72BB

Are you keeping the seats ? I'm looking for a rear-3rd row seat

Sorry, there is no 3rd row seat in it. The only seat left in it is the middle row seat.

**Dieselwrencher** · 12-17-2020, 08:00 PM

Quote:

Originally Posted by Dieselwrencher

I'll get you a pic of it soon.

It does have one on it.

**Dieselwrencher** · 12-17-2020, 08:05 PM

Quote:

Originally Posted by UP GRADE

How much for the climate control?

Here it is. $65 shipped

**Dieselwrencher** · 12-17-2020, 08:08 PM

Quote:

Originally Posted by trukman1

Do you have the power rear window switch on the dash and would it be the same for an '88? Also, is the rear air deflector factory? If so, would be interested. Thanks.

The switch is there but the bezel is broken.

trukman1 · 12-17-2020, 09:08 PM

Quote:

Originally Posted by Dieselwrencher

The switch is there but the bezel is broken.

Dieselwrencher, Thanks for the photo but I'll have to pass. trukman1

**Dieselwrencher** · 03-23-2021, 10:36 PM

Does anyone need a square body sport bumper?

I got the wiper switch removed, rear ac switch, rear window switch, and fro t sway bar off.

LUV2XCLR8 · 03-27-2021, 11:59 AM

Quote:

Originally Posted by Dieselwrencher

Does anyone need a square body sport bumper?

Yes, but your too far away for it to be worth it

**Dieselwrencher** · 04-01-2021, 01:13 PM

Quote:

Originally Posted by LUV2XCLR8

Yes, but your too far away for it to be worth it

I have a truck going to western Indiana next Friday if that would help. Brownsburg I believe.

LUV2XCLR8 · 04-02-2021, 08:55 AM

Quote:

Originally Posted by Dieselwrencher

I have a truck going to western Indiana next Friday if that would help. Brownsburg I believe.

Still too far away, but I do Appreciate it

**69cam** · 04-02-2021, 08:48 PM

Engine stands? If they are the same fore BB/SB. I need them to convert my 69 K-10. Pics to confirm they are what I'm looking for. Thanks in advance.

**Dieselwrencher** · 04-03-2021, 07:17 AM

Quote:

Originally Posted by 69cam

Engine stands? If they are the same fore BB/SB. I need them to convert my 69 K-10. Pics to confirm they are what I'm looking for. Thanks in advance.

They are the same for SBC/BBC but square body and 67-72 are different. I've seen the square body engine cross members installed in 67-72s, but I never do. I just can't bring my self to do it.

**69cam** · 04-03-2021, 09:30 AM

Many people on here have used the square body stands on 67-72, there is a write up in the FAQ's somewhere. That's what I want them for. No need to change the crossmember.

**Dieselwrencher** · 04-03-2021, 11:13 AM

Quote:

Originally Posted by 69cam

Many people on here have used the square body stands on 67-72, there is a write up in the FAQ's somewhere. That's what I want them for. No need to change the crossmember.

I guess this is a thing. I just used the google machine and from what I found they use the engine cross member with the stands since they bolt to the ends. Unlike the 67-72 where the stands bolt on top of the cross member.

Here's this one. Sorry for the bad pic.

**Dieselwrencher** · 04-03-2021, 11:17 AM

I have gotten some small stuff off this thing. The wiper switch and delay module look nice. No melted wires or hot spots. $45 shipped.

**bhc41051** · 04-03-2021, 04:40 PM

I'll take the wiper switch if no one is ahead of me.

**69cam** · 04-03-2021, 06:08 PM

Thank you for taking the time to grab a photo, but that is the wrong style. The stands I'm looking for resemble 72 only BB stands. Maybe i should be looking at 2wd. Thanks again.

katykitchen · 04-04-2021, 07:03 AM

Has the turn signal have cruise in it and could you send a close up. Thanks DP
Posted via Mobile Device

**Dieselwrencher** · 04-06-2021, 06:52 AM

Quote:

Originally Posted by bhc41051

I'll take the wiper switch if no one is ahead of me.

No one is ahead of you. It's yours. PM sent.

**Dieselwrencher** · 04-06-2021, 06:52 AM

Quote:

Originally Posted by katykitchen

Has the turn signal have cruise in it and could you send a close up. Thanks DP
Posted via Mobile Device

Sorry it did not but I might have another column that does have it.

**Dieselwrencher** · 04-06-2021, 06:54 AM

Tilt column sold
Wiper switch pending
Front spring hangers and sway bar sold
Hydraboost sold

katykitchen · 04-06-2021, 12:56 PM

I could use a turn signal lever with that kind of cruise control switch
Posted via Mobile Device

**Dieselwrencher** · 04-07-2021, 04:59 AM

Quote:

Originally Posted by katykitchen

I could use a turn signal lever with that kind of cruise control switch
Posted via Mobile Device

I'll check my other tilt columns as this one is already gone. I might have 1 more of the pre 80 columns with cruise.

Tilt column sold
Wiper switch sold
Front spring hangers and sway bar sold
Hydraboost sold

Still have steering wheel

Working on getting side trim off. Once I pull the doors off the rest might be going to be made into Toyotas. It's been in the way too long.

12-13-2020, 10:02 AM	#52
Greenlee Registered User Join Date: Jun 2004 Location: El Lago, TX Posts: 1,668	Re: Parting out 1979 K20 Suburban This is the part I’m looking for. Used on trucks with intermittent wiper from 78-83. I’m hunting down a problem with my wipers and already replaced everything else. Wouldn’t mind have the switch also in case the one I bought from LMC is junk. Attached Images

12-15-2020, 07:49 PM	#53
GMC72BB Registered User Join Date: Dec 2019 Location: JACKSONVILLE Posts: 51	Re: Parting out 1979 K20 Suburban Are you keeping the seats ? I'm looking for a rear-3rd row seat

03-23-2021, 10:36 PM	#59
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Parting out 1979 K20 Suburban Does anyone need a square body sport bumper? I got the wiper switch removed, rear ac switch, rear window switch, and fro t sway bar off. Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-02-2021, 08:48 PM	#63
69cam Senior Member Join Date: Jan 2017 Location: Olney Il. Posts: 231	Re: Parting out 1979 K20 Suburban Engine stands? If they are the same fore BB/SB. I need them to convert my 69 K-10. Pics to confirm they are what I'm looking for. Thanks in advance.

04-03-2021, 09:30 AM	#65
69cam Senior Member Join Date: Jan 2017 Location: Olney Il. Posts: 231	Re: Parting out 1979 K20 Suburban Many people on here have used the square body stands on 67-72, there is a write up in the FAQ's somewhere. That's what I want them for. No need to change the crossmember.

04-03-2021, 11:17 AM	#67
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Parting out 1979 K20 Suburban I have gotten some small stuff off this thing. The wiper switch and delay module look nice. No melted wires or hot spots. $45 shipped. Attached Images __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-03-2021, 04:40 PM	#68
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 788	Re: Parting out 1979 K20 Suburban I'll take the wiper switch if no one is ahead of me.

04-03-2021, 06:08 PM	#69
69cam Senior Member Join Date: Jan 2017 Location: Olney Il. Posts: 231	Re: Parting out 1979 K20 Suburban Thank you for taking the time to grab a photo, but that is the wrong style. The stands I'm looking for resemble 72 only BB stands. Maybe i should be looking at 2wd. Thanks again.

04-04-2021, 07:03 AM	#70
katykitchen Registered User Join Date: Aug 2016 Location: Excello MO Posts: 36	Re: Parting out 1979 K20 Suburban Has the turn signal have cruise in it and could you send a close up. Thanks DP Posted via Mobile Device

04-06-2021, 06:54 AM	#73
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Parting out 1979 K20 Suburban Tilt column sold Wiper switch pending Front spring hangers and sway bar sold Hydraboost sold __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-06-2021, 12:56 PM	#74
katykitchen Registered User Join Date: Aug 2016 Location: Excello MO Posts: 36	I could use a turn signal lever with that kind of cruise control switch Posted via Mobile Device

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.