|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
03-16-2021, 01:37 AM
|
#1 |
|
Senior Member
 
Join Date: Jul 2008
Location: kennewick, WA
Posts: 1,513
|
How to remove GMC cab/door trim
Hey guys, do I found this GMC Custom in a junkyard and I want to buy the trim. I will have to remove it and I’m sure it’s rusty and stubborn as can be. I have never removed this kind of trim before and looking for some insight on how to remove the entire set and any tips you guys might be able to give.
__________________
1965 c/10 swb 1969 c/10 lwb 
|
|
|
|
03-16-2021, 02:13 AM
|
#2 |
|
Registered User
Join Date: Feb 2019
Location: Madison, AL
Posts: 324
|
Re: How to remove GMC cab/door trim
It is held on by what I call spring clips on the backside, a trim removal tool would work. Guy removes a piece in the video below, but they do have the inner panel out which makes it easier to get to the backside.
https://youtu.be/tOWZWyB24LU?t=2580
__________________
1964 GMC Fleetside SWB 1966 Mustang Coupe 2013 Tahoe LT Last edited by 1slo64; 03-16-2021 at 02:22 AM. |
|
|
|
|
03-16-2021, 10:11 AM
|
#3 | |
|
Senior Member
Join Date: Jul 2008
Location: kennewick, WA
Posts: 1,513
|
Re: How to remove GMC cab/door trim
Quote:
__________________
1965 c/10 swb 1969 c/10 lwb
|
|
|
|
|
|
03-16-2021, 02:47 PM
|
#4 |
|
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 995
|
Re: How to remove GMC cab/door trim
The rust on the clips will give it some grip in the hole. A little spray lube sprayed under the trim at the clip will help. I would buy a cheap putty knife and cut a slot in the middle so the slot can go around the clip and pry carefully. I've seen that gmc trim sell for $200 per side. Can you see ANY of the clips from behind? If so push from behind like the video.
|
|
|
|
|
03-16-2021, 03:09 PM
|
#5 | |
|
Senior Member
Join Date: Jul 2008
Location: kennewick, WA
Posts: 1,513
|
Re: How to remove GMC cab/door trim
Quote:
That’s crazy! I’m mostly getting this stuff to use as trade material. I’ll give that a try! I’m an hour away from the truck and I didn’t have a ton of time to inspect the clips and mounting hardware the first time I was out there. Planning to go back Friday.
__________________
1965 c/10 swb 1969 c/10 lwb
|
|
|
|
|
|
03-16-2021, 03:54 PM
|
#6 |
|
Registered User
Join Date: Feb 2019
Location: Madison, AL
Posts: 324
|
Re: How to remove GMC cab/door trim
Yeah I've seen the trim for sale that high as well. I got lucky and paid $200 for all of mine.
Also forgot to mention they should be bolted to the door in a couple spots.
__________________
1964 GMC Fleetside SWB 1966 Mustang Coupe 2013 Tahoe LT Last edited by 1slo64; 03-16-2021 at 04:06 PM. |
|
|
|
|
03-17-2021, 12:25 PM
|
#7 |
|
Registered User
Join Date: Mar 2009
Location: CA
Posts: 814
|
Re: How to remove GMC cab/door trim
Take that seat.
|
|
|
|
|
03-17-2021, 01:23 PM
|
#8 | |
|
Senior Member
Join Date: Jul 2008
Location: kennewick, WA
Posts: 1,513
|
Re: How to remove GMC cab/door trim
Quote:
__________________
1965 c/10 swb 1969 c/10 lwb
|
|
|
|
|
|
03-20-2021, 09:39 PM
|
#9 |
|
Registered User
Join Date: Nov 2008
Location: kannapolis, nc
Posts: 528
|
Re: How to remove GMC cab/door trim
I never knew GMC made a custom. Cool
__________________
2000 c3500 utility bed 7.4l 5sp manual old body style. Cab and chassis 1964 GMC K10 383cu in/sm465/twin stick np205 1965 Chevy C60 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
