how do you mount a 1960-1963 dash speaker?

[JADF]

Hey!

I found this speaker which looks perfect for my needs. I'm planning on running something like that in the dash location and 6x9s in the rear. Only problem is I don't get how its supposed to mount. Looked under the dash and theres nothing there to support it. Also not planning on running a stereo in the stock dash location if that's whats used to hang it.

heres the link for the dash speaker:

https://www.classiccarstereos.com/ki...YaArcqEALw_wcB

any ideas on how to get it mounted in there?

[sirJim]

You need to get kind of creative on these. the Clip goes to a hook that is under the rubber of the windshield and the other is from the strap that went to the originale radio. I put one in a while back and it was a pain. If you dont put the radio in there would be the posibility of running a brace from the lip on the bottom of the dash. Hope this helps.

[The Rocknrod]

Here is a great thread of both aftermarket and original speaker mounts - http://67-72chevytrucks.com/vboard/s...d.php?t=581939

[JADF]

Originally Posted by The Rocknrod

Here is a great thread of both aftermarket and original speaker mounts - http://67-72chevytrucks.com/vboard/s...d.php?t=581939

I found that thread but it left me even more confused. The 60-63 only has one tab so its supported on only one side with the hook?

[The Rocknrod]

Originally Posted by JADF

I found that thread but it left me even more confused. The 60-63 only has one tab so its supported on only one side with the hook?

On the engine side yes. See? No confusion.