In desperate need of 62 c-10 axle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Andrew 62 · 07-20-2004, 05:08 PM

If any-one can help it may be you people. I've looked high and low for a drivers side rear axle for my 62 c-10 pick-up. Many claim to have it but fail to come up with the correct dimensions I need. If anybody can help it would be appreciated.

64fleetside · 07-22-2004, 12:11 AM

Try Tom Myers truck parts, Miami, OK (918)-542-3871

LeRoy · 08-12-2004, 01:37 PM

What rearend is it. 12 bolt or Dana 44. Give the length and spline count also

Andrew 62 · 08-21-2004, 10:39 AM

The rear-end is the Dana with the drop out third member. Spline count is 17. Length from inside surface to end of the button is 29 5/8 , or 29 9/16. the length is real close due to the axle being in two pieces. Also the button on the end is the thick button. There were 2 styles. One was about an eighth inch thick and the other around 5/16. Six lugs for the lug nuts also.

MOTHERTRUCKERS · 09-03-2004, 08:05 AM

Do you need the small or large button? also what zipcode for shipping?

jim walker · 09-04-2004, 05:36 PM

Quote:

Originally Posted by Andrew 62

The rear-end is the Dana with the drop out third member. Spline count is 17. Length from inside surface to end of the button is 29 5/8 , or 29 9/16. the length is real close due to the axle being in two pieces. Also the button on the end is the thick button. There were 2 styles. One was about an eighth inch thick and the other around 5/16. Six lugs for the lug nuts also.

I m comfused

Axle in 2 pieces? 60 - 62 should be the same (1/2 ton with removable gear carrier aka third member, pumkin) and my 61 axles are 1 piece. Never heard of a 2 piece axle. Also, are you referring to the button end as the end that accepts the c clips? Just curious...

Andrew 62 · 09-29-2004, 07:09 PM

To clear things up the axle broke into two pieces. And the button is the end that accepts the c-clips. And also I found a NOS axle at Tom Meyers. The truck is on the road and I drove it to my wedding last weekend. Of coarse I had to lay some rubber out of chuch. What other choice did I have, With everybody watching and all. Thanks 64 Fleetside for the advice.

64fleetside · 09-30-2004, 08:13 AM

Glad to hear you're back on the road. Brian

07-20-2004, 05:08 PM	#1
Andrew 62 Registered User Join Date: Jul 2004 Posts: 4	In desperate need of 62 c-10 axle If any-one can help it may be you people. I've looked high and low for a drivers side rear axle for my 62 c-10 pick-up. Many claim to have it but fail to come up with the correct dimensions I need. If anybody can help it would be appreciated.

08-12-2004, 01:37 PM	#3
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	What rearend is it. 12 bolt or Dana 44. Give the length and spline count also __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

09-03-2004, 08:05 AM	#5
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	Do you need the small or large button? also what zipcode for shipping? __________________ Rest in Peace Ed. Thanks for all the good times.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-22-2004, 12:11 AM	#2
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	Try Tom Myers truck parts, Miami, OK (918)-542-3871

08-21-2004, 10:39 AM	#4
Andrew 62 Registered User Join Date: Jul 2004 Posts: 4	The rear-end is the Dana with the drop out third member. Spline count is 17. Length from inside surface to end of the button is 29 5/8 , or 29 9/16. the length is real close due to the axle being in two pieces. Also the button on the end is the thick button. There were 2 styles. One was about an eighth inch thick and the other around 5/16. Six lugs for the lug nuts also.

09-29-2004, 07:09 PM	#7
Andrew 62 Registered User Join Date: Jul 2004 Posts: 4	To clear things up the axle broke into two pieces. And the button is the end that accepts the c-clips. And also I found a NOS axle at Tom Meyers. The truck is on the road and I drove it to my wedding last weekend. Of coarse I had to lay some rubber out of chuch. What other choice did I have, With everybody watching and all. Thanks 64 Fleetside for the advice.

09-30-2004, 08:13 AM	#8
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	Glad to hear you're back on the road. Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.