Correct Rag Joint - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**G8rN@te61** · 12-28-2021, 01:44 PM

Bought a new steering gear and rag joint from car and truck shop. The gear was an exact replacement and bolted right up but the rag joint they supplied had a flat spot in splines of coupler and the bolts were two different sizes.

Does anyone know where to get a correct rag joint that has splines all around inside the coupler and the two attachment bolts are the same size? I have a '61.

thanks,

Nate

**The Rocknrod** · 12-28-2021, 03:36 PM

Is it a 3/4-30? https://www.classicparts.com/1960-69...nfo/SS%2D5151/

**G8rN@te61** · 12-28-2021, 06:57 PM

3/4 x 36 spline. Do you know if its splined all the way around? The picture seems to show a flat spot.

Ive looked at the various websites that supply but I cant tell on any of them and I don't want to buy it and its not right and then pay shipping to send back.

**The Rocknrod** · 12-28-2021, 07:00 PM

I wouldn't buy anything that I wasn't sure of so I'd call them and find out.

**G8rN@te61** · 12-29-2021, 05:02 PM

I found one at oreillys that looks correct. When it comes in ill post an update.

**The Rocknrod** · 12-29-2021, 06:07 PM

Quote:

Originally Posted by G8rN@te61

I found one at oreillys that looks correct. When it comes in ill post an update.

Sounds good, lets us know.

12-28-2021, 01:44 PM	#1
G8rN@te61 Senior Member Join Date: Oct 2017 Location: Fort Mill, SC Posts: 203	Correct Rag Joint Bought a new steering gear and rag joint from car and truck shop. The gear was an exact replacement and bolted right up but the rag joint they supplied had a flat spot in splines of coupler and the bolts were two different sizes. Does anyone know where to get a correct rag joint that has splines all around inside the coupler and the two attachment bolts are the same size? I have a '61. thanks, Nate

12-28-2021, 03:36 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Correct Rag Joint Is it a 3/4-30? https://www.classicparts.com/1960-69...nfo/SS%2D5151/ __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-28-2021, 06:57 PM	#3
G8rN@te61 Senior Member Join Date: Oct 2017 Location: Fort Mill, SC Posts: 203	Re: Correct Rag Joint 3/4 x 36 spline. Do you know if its splined all the way around? The picture seems to show a flat spot. Ive looked at the various websites that supply but I cant tell on any of them and I don't want to buy it and its not right and then pay shipping to send back.

12-28-2021, 07:00 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Correct Rag Joint I wouldn't buy anything that I wasn't sure of so I'd call them and find out. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

12-29-2021, 05:02 PM	#5
G8rN@te61 Senior Member Join Date: Oct 2017 Location: Fort Mill, SC Posts: 203	Re: Correct Rag Joint I found one at oreillys that looks correct. When it comes in ill post an update.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.