Ok I know there is a thread on this lol - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sdwolff98 · 03-02-2022, 04:52 PM

Ok guys belt felt strips.. I have read the previous thread... but who out there is not happy with these repops? Or what have you done to f8x this issue? Talked with precision recently and waiting to see if they fix their screwed up parts. Left voice-mail with steele rubber engine. And they still don't close right.. let the discussion suggestion and maybe a rant or two to go er as well.. my door windows won't close.. mounting points straight as I can get them
Thanks
Sean

**cwcarpenter98** · 03-02-2022, 06:03 PM

Are you talking about the anti-rattle felt strips for the door windows? If yes, I just spread the mounting flange apart until the window closed fully.

Are you talking about the door seals not allowing the door to completely close? If yes, did you also adjust the latch mechanism, especially if the doors have been off the truck?

sdwolff98 · 03-02-2022, 07:00 PM

The felt strips at the bottom of the door that clear the windows. Yeah moved the mount parts till their straight adjusted regulator and rear tracks all of it sir
Thanks
Sean

sdwolff98 · 03-29-2022, 12:57 PM

Update on the issue apparently there was a bad batch of the strips got the updated ones and the problem is fixed. Got some other issues but that's another story lol
Sean

03-02-2022, 04:52 PM	#1
sdwolff98 Turning Wrenches Daily Join Date: Sep 2003 Location: Gladewater Texas Posts: 1,129	Ok I know there is a thread on this lol Ok guys belt felt strips.. I have read the previous thread... but who out there is not happy with these repops? Or what have you done to f8x this issue? Talked with precision recently and waiting to see if they fix their screwed up parts. Left voice-mail with steele rubber engine. And they still don't close right.. let the discussion suggestion and maybe a rant or two to go er as well.. my door windows won't close.. mounting points straight as I can get them Thanks Sean __________________ Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867 Last edited by cwcarpenter98; 03-02-2022 at 06:01 PM.

03-02-2022, 06:03 PM	#2
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,491	Re: Ok I know there is a thread on this lol Are you talking about the anti-rattle felt strips for the door windows? If yes, I just spread the mounting flange apart until the window closed fully. Are you talking about the door seals not allowing the door to completely close? If yes, did you also adjust the latch mechanism, especially if the doors have been off the truck? __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-02-2022, 07:00 PM	#3
sdwolff98 Turning Wrenches Daily Join Date: Sep 2003 Location: Gladewater Texas Posts: 1,129	Re: Ok I know there is a thread on this lol The felt strips at the bottom of the door that clear the windows. Yeah moved the mount parts till their straight adjusted regulator and rear tracks all of it sir Thanks Sean __________________ Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867

03-29-2022, 12:57 PM	#4
sdwolff98 Turning Wrenches Daily Join Date: Sep 2003 Location: Gladewater Texas Posts: 1,129	Re: Ok I know there is a thread on this lol Update on the issue apparently there was a bad batch of the strips got the updated ones and the problem is fixed. Got some other issues but that's another story lol Sean __________________ Work! Play! Work work work! Money to play with. 64 GMC, 66 burb 4x4, and now 64 1ton money pits......ahhh life is good. Upcoming move back to Texas Dallas bound we are this september!!! 1964 GMC I1500 2wd (my baby) 8.1 allison 6 spd conversion Aka Smurf http://67-72chevytrucks.com/vboard/s...d.php?t=438342 2016 Ram Big Horn 4WD parts hauler 2010 Chevy HHR wife new car after the circled problem blew up!!! 1981 Ram D150 /6 auto Wife's sunday driver Living outside Gladewater Texas now working in Longview at the hospital there future project toys: 1966 Chevy K14 carryall aka Smurfette future project 283/auto overdrive http://67-72chevytrucks.com/vboard/s...d.php?t=551867

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.