3.5" BS 18x9 will they fit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Durwood63 · 05-29-2022, 08:49 AM

I found a set of Dtowns in 18x9 with 3.5" BS and would like opinions on if they would work on a 63 long fleet 5/7 static drop. From what I found in need a 4.5" BS or 0 offset am I correct in my research.

**Warrens69GMC** · 05-29-2022, 11:49 AM

Curious as well...

SCOTI · 05-30-2022, 09:32 AM

Quote:

Originally Posted by Durwood63

I found a set of Dtowns in 18x9 with 3.5" BS and would like opinions on if they would work on a 63 long fleet 5/7 static drop. From what I found in need a 4.5" BS or 0 offset am I correct in my research.

Depends on how the drop was done.... That being said, I'll wager it would be too close to the edge of the fenders.

theastronaut · 06-01-2022, 02:36 PM

I have 8" with 3 3/8" BS and 235 wide tires, the sidewall is about 1/2" from the wheel opening lip. '66 Fleetside, stock rear axle. You'd need the extra width on the inside, or more backspacing to get 9" to fit.

05-29-2022, 08:49 AM	#1
Durwood63 Registered User Join Date: May 2010 Location: Dudley MA. Posts: 3	3.5" BS 18x9 will they fit? I found a set of Dtowns in 18x9 with 3.5" BS and would like opinions on if they would work on a 63 long fleet 5/7 static drop. From what I found in need a 4.5" BS or 0 offset am I correct in my research. __________________ 63 C10 SBW Long Bed 67 Chevelle SS396 15 HD RGS

05-29-2022, 11:49 AM	#2
Warrens69GMC Registered User Join Date: Jan 2003 Location: Safford,AZ Posts: 3,625	Re: 3.5" BS 18x9 will they fit? Curious as well... __________________ 1969 307, t350 1950 Chevy Wagon 1978 Big 10 1967 C10, 250,3-OTT

06-01-2022, 02:36 PM	#4
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: 3.5" BS 18x9 will they fit? I have 8" with 3 3/8" BS and 235 wide tires, the sidewall is about 1/2" from the wheel opening lip. '66 Fleetside, stock rear axle. You'd need the extra width on the inside, or more backspacing to get 9" to fit. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.