|
07-23-2022, 04:15 PM
|
#1 |
|
Registered User
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
|
ls1 Cadillac
about 10 years ago I restro moded a 1956 Studebaker wagon. I installed a 1999 LS1 out of a Camero. For an engine cover I bought one off ebay that I slightly modified. I am trying to buy another cover. Here's my question. Did Cadillac ever put a LS1 in from the factory? I am going from my memory that the one I bought came from a Cadillac, but I cannot seem to find one on ebay that looks like it. If you goggle (barrett jackson lot 156.1 Studebaker Champion custom wagon) you will see my old car on Barrett Jackson when it went across the block. There is a picture of the cover I am looking for. It is the orange and white retro mod. Any ideas what I am looking for. Thanks
Last edited by kglowacky; 07-23-2022 at 04:29 PM. |
|
|
|
07-23-2022, 04:37 PM
|
#2 |
|
Moderator
  
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: ls1 Cadillac
Cadillac CTS-V sedan, was launched in 2004. Powered by the GM LS engine V8, with a six-speed Tremec manual transmission.
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
07-23-2022, 04:37 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: ls1 Cadillac
CTS-V cover maybe? https://ls1tech.com/forums/parts-cla...ine-cover.html
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
07-23-2022, 04:57 PM
|
#4 |
|
Registered User
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
|
Re: ls1 Cadillac
that's it. I knew someone would know. anyone have access to a GM part #. I am struggling to find one. The ad above is many years old. Thanks
Last edited by kglowacky; 07-25-2022 at 02:02 PM. |
|
|
|
|
07-28-2022, 04:18 PM
|
#5 |
|
Moderator
Join Date: Jun 2017
Location: Cherryville, NC
Posts: 2,204
|
Re: ls1 Cadillac
__________________
Family and country before all others... 2006 Chevy Silverado (Daily Driver) 2012 Chevy Equinox 
|
|
|
|
|
07-28-2022, 04:35 PM
|
#6 |
|
Moderator
Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: ls1 Cadillac
Better act quick - https://www.ebay.com/itm/17536145467...MAAOSw3KRi3J5R
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
|
|
|
|
07-30-2022, 12:49 AM
|
#7 |
|
Registered User
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
|
Re: ls1 Cadillac
done. I own it. Thanks
|
|
|
|
|
09-27-2022, 05:40 PM
|
#8 |
|
Registered User
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 588
|
Re: ls1 Cadillac
Started with buying the cover mentioned above. The cut it down to fit my motor. Had it painted and then went on the hunt for a bowtie emblem to replace the CAtillac emblem. Found this aftermarket valve cover breather that I then cut the top off the fit my application and then the final result. Thanks everyone. On to the next upgrade. Last edited by kglowacky; 09-27-2022 at 05:46 PM. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
