ECE trailing arm reinforcemnt kit? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe67 · 08-12-2004, 11:03 AM

Just wondering your thoughts on this kit. Is it worth doing?

I will be lowering my SWB 2wd truck and plan on towing a race car with it from time to time.

ECE Kit

neonlarry · 08-12-2004, 01:40 PM

If you are going to be running high horsepower they are probably a good idea if you don't have ¾ton arms (they are already reinforced). They probably won't make that much difference just for occasional towing.

Joe67 · 08-12-2004, 01:42 PM

Thanks.
The powerplant isn't determined just yet - I'm a ways from that

XXL · 08-12-2004, 10:02 PM

Quote:

Originally Posted by neonlarry

if you don't have ¾ton arms (they are already reinforced).

Are you sure about this?

neonlarry · 08-13-2004, 07:36 AM

Yes, but not as much as the ECE kit.

rodnok1 · 08-13-2004, 01:58 PM

I seperated mine because of some rust, then welded the top and bottom seams completely shut, I wouldn't go put them on unless you were hauling something insanely heavy.

Joe67 · 08-13-2004, 02:02 PM

Thanks guys

08-12-2004, 11:03 AM	#1
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	ECE trailing arm reinforcemnt kit? Just wondering your thoughts on this kit. Is it worth doing? I will be lowering my SWB 2wd truck and plan on towing a race car with it from time to time. ECE Kit __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-12-2004, 01:40 PM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	If you are going to be running high horsepower they are probably a good idea if you don't have ¾ton arms (they are already reinforced). They probably won't make that much difference just for occasional towing. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-12-2004, 01:42 PM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Thanks. The powerplant isn't determined just yet - I'm a ways from that __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-13-2004, 07:36 AM	#5
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Yes, but not as much as the ECE kit. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

08-13-2004, 01:58 PM	#6
rodnok1 Registered User Join Date: Jun 2003 Location: Linden, North Carolina Posts: 617	I seperated mine because of some rust, then welded the top and bottom seams completely shut, I wouldn't go put them on unless you were hauling something insanely heavy. __________________ 64 Panel Rebuild Pics Clutch Replacement and Borg Warner T10 Trans Rebuild 64 Panel 1/2 Ton 350cubes/400hp BorgWarner t-10 3:73 Auburn Posi

08-13-2004, 02:02 PM	#7
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Thanks guys __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.