65 C-10 Header question.

[onebad65c10]

Good day all. Have a 1965 C10 with a mild 383 stroker, Tremec Tko-600 5 speed. Looking for a new set of headers. Since I found my old Hedman shorties are cracked.
Looking.obce again at Hedman mid length part numbers 69026, 69016. Both have pictures and look the same. Looking to upgrade but neither of these headers state they fit 64-66 C10s.
What makes the issue worse is I am still running a stock style and location Z bar for my clutch.
Polling the audience for suggestions on shorty or mid length heads that'll work with clutch linkage.

Thank you.

[1966c10shrtbd]

https://www.speedwaymotors.com/Tight...ders,3816.html

[onebad65c10]

Originally Posted by 1966c10shrtbd

https://www.speedwaymotors.com/Tight...ders,3816.html

I tried that type before and they dumped right at my engine crossmember. I found a set for a Camaro that should work. Ill see once they come in.

[62bagger]

Originally Posted by onebad65c10

I tried that type before and they dumped right at my engine crossmember. I found a set for a Camaro that should work. Ill see once they come in.

I had the same issue on my 62 and ended up with Sanderson #Sanderson Headers CC3158-DPSEC.

[PowerdbyChevy79]

Hedman 69010 work pretty good