The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-15-2023, 06:10 PM   #1
forestb
Registered User
 
forestb's Avatar
 
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
Gear oil on break pads.

Some gear oil was leaking into my rear drum break. The rear end shop said that they were able to clean off the little bit of gear oil that got onto the brake pads. I have always heard that if you get gear oil on the pads that they are pretty much ruined. Should I get new brake pads? I didn’t see how much gear oil was in the pads.
forestb is offline   Reply With Quote
Old 10-15-2023, 07:15 PM   #2
Chevy nutcase
Registered User
 
Chevy nutcase's Avatar
 
Join Date: Mar 2021
Location: Hershey Pennsylvania
Posts: 339
Re: Gear oil on break pads.

Quote:
Originally Posted by forestb View Post
Some gear oil was leaking into my rear drum break. The rear end shop said that they were able to clean off the little bit of gear oil that got onto the brake pads. I have always heard that if you get gear oil on the pads that they are pretty much ruined. Should I get new brake pads? I didn’t see how much gear oil was in the pads.
I always ditched pads or shoes that got a bath in gear oil. They are likely wear out faster and to grab a lot faster and uncontrollably. I had an 87 blazer on 35s and without warning as I tried to slow from 50 mph to turn into a side street and unbeknownst to me the axle seal donated a nice portion of gear oil causing my right rear tire to completely lock up at the slightest touch of the pedal. Its cheap insurance so change the shoes on both sides of the offending axle after the seals are replaced. Check the bearings while it's apart
Chevy nutcase is offline   Reply With Quote
Old 10-15-2023, 07:54 PM   #3
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 8,418
Re: Gear oil on break pads.

I have never taken the chance on the oil-soaked brake pads.

The oil will crystalize the surface of the brake pad.

Here is actually a video that I just found.

__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)


http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Old 10-15-2023, 07:57 PM   #4
forestb
Registered User
 
forestb's Avatar
 
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
Re: Gear oil on break pads.

How should I clean up the inside of the drum?
forestb is offline   Reply With Quote
Old 10-15-2023, 08:07 PM   #5
Getter-Done
Senior Member
 
Getter-Done's Avatar
 
Join Date: Dec 2009
Location: TN.
Posts: 8,418
Re: Gear oil on break pads.

You can clean the rest with brake cleaner.
Spray then scrape as much as you can.

Then use rags, Spray and wipe it down with the rags.

I am always careful washing my hands often and try not to breathe any of the dust.
__________________
________________________________________________________________________________________
____________________________________________
84 Chevy K-20
63 Impala (my high school car)


http://67-72chevytrucks.com/vboard/s...Crew Cab Build
Getter-Done is offline   Reply With Quote
Old 10-17-2023, 04:05 PM   #6
AcampoDave
Registered User
 
AcampoDave's Avatar
 
Join Date: Feb 2013
Location: central California
Posts: 2,778
Re: Gear oil on break pads.

If the drums look smooth and kind of mirrored after cleaning, I like to scuff them with 400 to 600 wet n dry paper and use a bit of WD40 to kill the dust and lube the paper. Then I wipe them up good with rubbing alcohol or acetone. Pretty much like a Getter-Done version of having them turned.
AcampoDave is offline   Reply With Quote
Old 12-27-2023, 12:26 AM   #7
Cape Codder
Registered User
 
Cape Codder's Avatar
 
Join Date: May 2013
Location: Centerville,Ma.
Posts: 1,223
Re: Gear oil on break pads.

If you get oil leaking on the brakes check the vent hose from the rear end . Spiders are known to build a nest in the vent causing pressure build up and will make a good seal leak. Remove the hose from the rear and see if you can blow through it
Cape Codder is offline   Reply With Quote
Old 12-27-2023, 12:37 AM   #8
forestb
Registered User
 
forestb's Avatar
 
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
Re: Gear oil on break pads.

Thanks for the tip. I have never really thought about the vent and what it is even there for.
forestb is offline   Reply With Quote
Old 12-27-2023, 08:09 AM   #9
Cape Codder
Registered User
 
Cape Codder's Avatar
 
Join Date: May 2013
Location: Centerville,Ma.
Posts: 1,223
Re: Gear oil on break pads.

There to relieve pressure build up as the rear heats up
Cape Codder is offline   Reply With Quote
Old 12-27-2023, 08:49 AM   #10
dlbraly
Registered User
 
dlbraly's Avatar
 
Join Date: Jul 2007
Location: Wylie
Posts: 38
Re: Gear oil on break pads.

I agree.
Replace the shoes and just use Brakleen Brake Parts Cleaner or something like it to clean the drums.
In one of the dealerships I worked at had a roll around brake cleaner station. It was a small parts cleaner station sat on a barrel like the ones you see at Harbor Freight. They wanted us to use it to cut back on costs of Brakleen. I liked it, it worked well.
I have not worked at a dealer in over 25 years.
__________________
Take Care,
Dave
dlbraly is offline   Reply With Quote
Old 12-27-2023, 09:11 AM   #11
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
Re: Gear oil on break pads.

The side that got wet will grab different that the uncontaminated side. Shoes are cheap and I always replace
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is offline   Reply With Quote
Old 12-27-2023, 08:15 PM   #12
forestb
Registered User
 
forestb's Avatar
 
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,619
Re: Gear oil on break pads.

I ended up replacing the shoos back in October. They are working great.
forestb is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com