FabBot AR5 adapter and bellhousing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chev-obsession** · 10-29-2023, 06:11 PM

This is the original design Fab Bot AR5 adapter that requires you to modify the 4L60 bell housing. Powder coated bellhousing that has been modified and ready for install, comes with everything pictured, this is a complete kit with all of the parts down to the bolts . This setup has about 700 miles on it. This is what you need to adapt an AR5 to an LS motor. Throwout bearing worked good as well.

SOLD

WorldsCrappiestTruck · 01-07-2024, 09:15 AM

I’d do $375 if you still have the pieces.

**chev-obsession** · 01-07-2024, 11:28 AM

Quote:

Originally Posted by WorldsCrappiestTruck

I’d do $375 if you still have the pieces.

This has been sold

10-29-2023, 06:11 PM	#1
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,513	FabBot AR5 adapter and bellhousing This is the original design Fab Bot AR5 adapter that requires you to modify the 4L60 bell housing. Powder coated bellhousing that has been modified and ready for install, comes with everything pictured, this is a complete kit with all of the parts down to the bolts . This setup has about 700 miles on it. This is what you need to adapt an AR5 to an LS motor. Throwout bearing worked good as well. SOLD Attached Images __________________ 1965 c/10 swb 1969 c/10 lwb Last edited by chev-obsession; 01-07-2024 at 11:29 AM.

01-07-2024, 09:15 AM	#2
WorldsCrappiestTruck Registered User Join Date: Mar 2022 Location: Hinesburg Vermont Posts: 133	Re: FabBot AR5 adapter and bellhousing I’d do $375 if you still have the pieces.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.