I'm looking for a body-off pic

[Shifty One]

Of a 4x4 small-block headers with duals, preferable without cats. Brand of headers, and any difficulties installing them is a plus.

Thanks!

[JJH Jimmy]

Edelbrock headers. They fit like a glove. I believe they are shortys originally for tbi trucks.

[geezer#99]

Jimmy, have you driven it with the trans yoke out so far?

[Shifty One]

Thanks Jimmy!


What about some long tubes now? I should have specified...

[JJH Jimmy]

Originally Posted by geezer#99

Jimmy, have you driven it with the trans yoke out so far?

About 10K miles. Originally the truck had a SM465 trans and i swapped it out for a TH400 when i built it but the transfer case stayed in the same spot. It was obvious from the seal wear on the yoke that it was like that for a long time and it still engaged the TC output shaft by about 5". This winter i switched out the TH400 for a 4l80E and there is about an 1" of play before it bottoms out on the TC output shaft.

[geezer#99]

Thanks Jimmy.
It caught my eye, looked weird.