WTB 89 1 ton interior parts

[23and56]

Have 89 1 ton crw cab that Im Looking for original seats and want to know what was available in them 60/40, buckets, etc.Or does anyone know what might fit these trucks.Thanks bwtbucket@yahoo.com

[Grim Reaper]

Originally Posted by 23and56

Have 89 1 ton crw cab that Im Looking for original seats and want to know what was available in them 60/40, buckets, etc.Or does anyone know what might fit these trucks.Thanks bwtbucket@yahoo.com

I think the only option was buckets and bench. No 60/40. Front buckets out of a Burb would be the same. The bench could be had in a burb but was a pretty uncommon option. Rear seat is a standard truck (through 87) bench. You could get creative and use the 60/40 out of a newer truck but will have to make customer mounts to deal with the raised floor. The new trucks the floor where the seat mounts is about 1 inch higher then door sill. You truck is about 56 inches. The riser is basicly the floor. You could relo the tanks if in the way and make a flat floor like a K5 and then run the late model seats stock. The mid 90's dodge seats are pretty nice. A buddy has them in his K5. Has the fixed center that the back will flip dow as armrest with cup holder and storage but can flip up and be a seat as well.

[1972C10]

i had some 60/40s 89 one ton is an 88-98 body style right?

I had some 93 60/40 split bench with blue velour type matieral.

[bisquik65]

I have a 87 crew dually and it has factory bucket up front and a rear seat folds out to a bed. I am pulling the front seats out and they would need redone (tan cloth) if you are interested.

[GMCLS1]

Originally Posted by bisquik65

I have a 87 crew dually and it has factory bucket up front and a rear seat folds out to a bed. I am pulling the front seats out and they would need redone (tan cloth) if you are interested.

I sent you a PM bisquik65.