Parting a 70, Speak up for parts QUICK! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 11-20-2004, 04:28 PM

This one is getting crushed on monday morning. If you see something you need speak up quick. Prices will be reasonable and i won't pull any difficult parts (suspension, fenders etc...) The 6 cyl looks complete with the preheat still on it. I will post prices as needed. No power steering or brakes.

6(sic)6 · 11-20-2004, 07:33 PM

does it have a Rear bumper? if so anypics?

lamar · 11-20-2004, 07:45 PM

How about the gauges?

BobS · 11-20-2004, 08:08 PM

I like the rims on your trailer!

Bob

*Don Loverink* · 11-20-2004, 09:14 PM

Strummer, what'd you do with the 6 cyl tach that came with that truck?? Its sat night, where are you? Rons heading over to 4th St Bar tonight, he asked me to go up there, couldnt make it tonight, might see you tommorrow, later.........Don

Green Machine · 11-20-2004, 10:16 PM

Im not interested but what about the glovebox door??? Because I don't think you can buy those new

68C15 · 11-20-2004, 10:50 PM

doors man, DOORS!!!!
also rad support.
prices & possibly some more pics?
remember me? I got the motor mount towers earlier. I missed you at Shuttermutt's.

**too much stuff** · 11-21-2004, 01:02 AM

I have a couple bumpers lying around for the rear, but on this truck there is nothing behind the cab. No frame even!
The gauges are just idiot lights. Is that what you need?
Doors are not REAL bad, but not real good either. Core support is gone under the batt. Don't really have time to pull bigger items, unless you want to make a roadtrip over to help!!!
This truck will be gone sun. eve.
Not my trailer, but the rims do dress it up a little.

68C15 · 11-21-2004, 09:10 AM

no offense but I think I may have to pass then. due to my current time obligations I am not able to make any trips until close to Xmas. unless you have access to a torch for quick & easy removal of just the parts needed. (I would not normally condone this but since the rest is going to be crush fodder.....)

roj2323 · 11-21-2004, 01:20 PM

pull the fan shroud, wiring harnesses, glove box door, carberator, tilt colum, and gages. there all worth your time in money and others will want them. just an fyi
ondrew
p.s if the exaust manafold isin't cracked you may want to take that as well.

**ScottH** · 11-21-2004, 04:10 PM

If it has a tilt column I would be interested. Also may need wire to gas tank (wire and end that clips onto float).

Thanks.

**too much stuff** · 11-21-2004, 04:21 PM

No tilt column, it is a 3 speed manual.
ScottH, the seat is in there and i can't open the doors at this point. So it would be tough to get to.
Going in a couple hours...
68c15, the rad support is BAD, so you are not missing out!

**too much stuff** · 11-21-2004, 09:01 PM

Truck is gone! Here are a few pieces i saved.
The green stuff $20 plus ship
The 6 cyl pile is $25 plus ship.
The last pic is what i had to work with so you know why it was tough to pull bigger parts.

teeitup · 11-21-2004, 09:17 PM

I wanted the steering wheel!!!!!!!

**too much stuff** · 11-21-2004, 11:29 PM

O.K randy, it is yours! It is the rare aviation model put on only select trucks. Not sure if i can put a value on it however. Maybe trade for a tach, tilt, hooks, and an am/fm.

11-20-2004, 04:28 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	Parting a 70, Speak up for parts QUICK! This one is getting crushed on monday morning. If you see something you need speak up quick. Prices will be reasonable and i won't pull any difficult parts (suspension, fenders etc...) The 6 cyl looks complete with the preheat still on it. I will post prices as needed. No power steering or brakes. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2004, 07:33 PM	#2
6(sic)6 Registered User Join Date: Nov 2004 Location: Texas Posts: 199	does it have a Rear bumper? if so anypics? __________________ Daily Driver: 383 sbc Shaved. lowerd

11-20-2004, 08:08 PM	#4
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 569	I like the rims on your trailer! Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

11-20-2004, 09:14 PM	#5
Don Loverink Account Suspended Join Date: Dec 2003 Location: Brainerd, Minnesota Posts: 1,063	truck Strummer, what'd you do with the 6 cyl tach that came with that truck?? Its sat night, where are you? Rons heading over to 4th St Bar tonight, he asked me to go up there, couldnt make it tonight, might see you tommorrow, later.........Don

11-20-2004, 10:50 PM	#7
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	doors man, DOORS!!!! also rad support. prices & possibly some more pics? remember me? I got the motor mount towers earlier. I missed you at Shuttermutt's. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

11-20-2004, 07:45 PM	#3
lamar Registered User Join Date: Apr 2004 Location: Covington,Ga Posts: 453	How about the gauges?

11-20-2004, 10:16 PM	#6
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Im not interested but what about the glovebox door??? Because I don't think you can buy those new

11-21-2004, 01:02 AM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	I have a couple bumpers lying around for the rear, but on this truck there is nothing behind the cab. No frame even! The gauges are just idiot lights. Is that what you need? Doors are not REAL bad, but not real good either. Core support is gone under the batt. Don't really have time to pull bigger items, unless you want to make a roadtrip over to help!!! This truck will be gone sun. eve. Not my trailer, but the rims do dress it up a little. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-21-2004, 09:10 AM	#9
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	no offense but I think I may have to pass then. due to my current time obligations I am not able to make any trips until close to Xmas. unless you have access to a torch for quick & easy removal of just the parts needed. (I would not normally condone this but since the rest is going to be crush fodder.....) __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card

11-21-2004, 01:20 PM	#10
roj2323 Senior Member Join Date: Mar 2004 Location: Somewhere Posts: 985	pull the fan shroud, wiring harnesses, glove box door, carberator, tilt colum, and gages. there all worth your time in money and others will want them. just an fyi ondrew p.s if the exaust manafold isin't cracked you may want to take that as well.

11-21-2004, 04:10 PM	#11
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,191	If it has a tilt column I would be interested. Also may need wire to gas tank (wire and end that clips onto float). Thanks.

11-21-2004, 04:21 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	No tilt column, it is a 3 speed manual. ScottH, the seat is in there and i can't open the doors at this point. So it would be tough to get to. Going in a couple hours... 68c15, the rad support is BAD, so you are not missing out! __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-21-2004, 09:01 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	Truck is gone! Here are a few pieces i saved. The green stuff $20 plus ship The 6 cyl pile is $25 plus ship. The last pic is what i had to work with so you know why it was tough to pull bigger parts. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-21-2004, 09:17 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	I wanted the steering wheel!!!!!!! __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-21-2004, 11:29 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,813	O.K randy, it is yours! It is the rare aviation model put on only select trucks. Not sure if i can put a value on it however. Maybe trade for a tach, tilt, hooks, and an am/fm. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.