Trans. case, tranny, bed, misc.

[jared stewart]

I have these parts for sale, I can get pictures of any or all of them if there's any interest.

-205 transfer case - $150
-4 speed tranny with granny low, doesn't stay in 2nd - $50
-'81 3/4 ton 4x4 frame and bed (everything minus the cab and the front axle) the bed is is good shape with minor rust. The only holes in the bed are where the bolts were torched off. There is a small hole in the front passenger side quarter of the bedside. The tailgate is in good shape with a small dent in the top of it. It's drivers side gas fill. It has a 14 bolt rear end 4.10. Springs all around and the front sway bar (I guess that's what it's called). I bought the truck to use the cab so it's gone - $500

[Hause]

Is the NP205 for the 4 speed? Could you send me a pick? Is the adapter included?

Thanks,

Phil

Originally Posted by jared stewart

I have these parts for sale, I can get pictures of any or all of them if there's any interest.

-205 transfer case - $150
-4 speed tranny with granny low, doesn't stay in 2nd - $50
-'81 3/4 ton 4x4 frame and bed (everything minus the cab and the front axle) the bed is is good shape with minor rust. The only holes in the bed are where the bolts were torched off. There is a small hole in the front passenger side quarter of the bedside. The tailgate is in good shape with a small dent in the top of it. It's drivers side gas fill. It has a 14 bolt rear end 4.10. Springs all around and the front sway bar (I guess that's what it's called). I bought the truck to use the cab so it's gone - $500

[jared stewart]

Yes the 205 is for the 4 speed. I'll get you some pictures as soon as I can. It's supposed to start raining today so I won't be able to get in the fields so I should get it tonight for you.

[Hause]

Have you had a chance to get the picture of the transfer case?

Thanks,

Phil

[jared stewart]

Here are the pictures of the t-case and the rest of the frame and bed. Sorry about the delay.

[Hause]

How long has the transfer case been sitting uncovered in the mud? I am concerned about the condition of the internal parts, could you pull the cover off and post another picture of the gears?

Thanks,

Phil

[jared stewart]

It's not sitting in the mud, the frame is holding it up. I'll will try to pull the cover and snap some more pictures this weekend. No guarantees, they're calling for more rain this afternoon and tonight.

[Paso76GMCstepper]

Looks iffy to me. Looks like its in the mud beings the frame part that holds it up is in the mud. A picture of the inside would be helpfull.

[Crank]

Man, let me tell ya, it dont matter if the cases of that t case are in the mud. The only part of concern is where the transmission butt to it and the 2 output shafts.
Brandon

[rich-white]

Hey Jared that trailer you have pic's of. Would you sell the mounting brackets off that bumper? I have a nice chome bumper like that but no mounting brackets.

[jared stewart]

Originally Posted by rich-white

Hey Jared that trailer you have pic's of. Would you sell the mounting brackets off that bumper? I have a nice chome bumper like that but no mounting brackets.

Yeah, I'd sell them. Any idea what they're worth, or I guess what they'd be worth to you.

I haven't forgot about pulling the cover off that t-case, just been busy and it gets dark about 45 minutes after I get home now. I'll get it soon.

[rich-white]

Dude there your parts.... any ideas??????? Don't want to offend.

[jared stewart]

Originally Posted by rich-white

Dude there your parts.... any ideas??????? Don't want to offend.

$20 plus shipping?

[rich-white]

Take $15 plus ride?

[jared stewart]

Originally Posted by rich-white

Take $15 plus ride?

Sure, just let me get them off and make sure they're in good shape. I'm in the field cutting beans right now, so it'll probably be a while before I can get to them, hope that's not a problem.

[jared stewart]

Extremely sorry about the wait, but I finally got the pictures of the t-case guts. Looks good, everything moves freely and no gouges out of any of the teeth that I could see. Still had oil in it.

[1972]

Is it missing the front output shaft yoke?

[jared stewart]

Originally Posted by 1972

Is it missing the front output shaft yoke?

I'll have to look on the tranny and see if it's on there.